What did you do to your Mk5 today?

[Fatherless One]

Fitted a GTI instrument cluster facia to the TDI's cluster and I had another flat bottom steering wheel with ST2 paddles on it that I put on (don't think I like them).

Before

Attachment 16638

After

Attachment 16639

Great mod, was this hard to do?

[asa572]

Very easy to do.
There are 6 clips around the cluster and you split it and swap fascia's.
You need to be careful as the clips that hold the fascia's on are easily broken.

Picture of what the clips looks like

[Fatherless One]

Very easy to do.
There are 6 clips around the cluster and you split it and swap fascia's.
You need to be careful as the clips that hold the fascia's on are easily broken.

Picture of what the clips looks like

Excellent thanks, did it matter if the donor cluster was a full or half height MFD? And although the Hour/Minutes and 0.0 buttons are slightly different was it just disconnect and reconnect?

[asa572]

Doesn't matter when putting a full height onto a half height and all the buttons line up.
One thing I didn't realise is, when you pull the standard cluster apart there are green pieces on the top of both blinker signals.
The gti's are built into the fascia, so if you don't remove the standard ones you can barely see when the blinkers are on because the light
is having to go through two pieces of green plastic.

[golfmeup]

Fitted a few goodies today
Car bra


Flappy paddle extenders



And a rabbit sticker just for fun

[Pollywaffle]

I guess this explains my noisy idle...



Anyone place I can buy these in Sydney? Or do they have to be ordered online?
Camshaft looks ok, but, I guess I won't know until I put a fresh cam follower in. I don't know how much a camshaft lobe can take before being worn out by this. Fingers crossed!

EDIT: Did some digging around, found a couple of places in Sydney. Won't be able to grab one until Thursday though

[Deadpool]

I guess this explains my noisy idle...



Anyone place I can buy these in Sydney? Or do they have to be ordered online?
Camshaft looks ok, but, I guess I won't know until I put a fresh cam follower in. I don't know how much a camshaft lobe can take before being worn out by this. Fingers crossed!

Camshaft will be fine, it hasn't punched through. That's when you should be worried.

[Pollywaffle]

That's a huge relief. Thank you.

[golfmeup]

[QUOTE=Pollywaffle;1154111]That's a huge relief. Thank you.[/]

I should probably check mine as well!

[themarvel2004]

Hmmm. Likewise. My idle had become rather ticky lately too.

In other news - fitted this tonight:

Hopefully this fixes my high oil consumption. Was a lot in the tube to the intake...

Sent from my LG-D855 using Tapatalk