MK5 GTI Race Car

[muggo05]

Hey guys,
Wanted to show you all our new race car that's currently in the build phase. My brother and I bought the car as a stat write off and had it repaired and it's now getting built into a Production Touring car which will be eligible for the State Championship, National Championship in Amchamps and the Bathurst 6 hour. Will compete in Class D against cars like the Toyota 86's and Honda Integra Type R's.

The MK5 will be joining my MK7 road car in the garage.

We have a page JJM Motorsport we have set up (won't let me tag it here) if you want to keep up to date and follow our progress. We are always on the lookout for sponsors too so if you know anybody who may be interested please point them our way.

Arriving this week will be our Yellowspeed Competition Coilovers as well as DBA T3 4000 series Rotors and Ferodo DS1.11 Endurance Pads ready for Wakefield Park and a Trackschool Trackday on the 17th for its first shakedown. I'll actually be a client instead of instructing for once!!

Cheers,

Josh.

[HaydEn]

Following

[muggo05]

Hey guys,

We've made some progress before Trackschool this saturday.

Tow strap, seat, harness and we've raised the floor to match the bottom of the throttle pedal (this is a test fit with an old sheet of checker plate before we buy a new piece and do it properly).





Our Yellowspeed Coilovers and brakes have also arrived which will be going in this week



Getting excited!

[Feeine]

looks good mate!
i was the bloke in the silver MK5 @ wakefield in december

[nabaki]

👍👍👍
Following

Samsung'tan gönderildi...

[Notso Swift]

Class D is a bit of a win for you!
Make sure you don't go too fast and get bumped up LOL

[muggo05]

Hi All,

Sorry for the lack of posts, been a crazy end and start to '16/'17!

Test day went amazingly well.

We fitted the Yellowspeed coilovers and changed out the brake fluid for DOT 5 racing fluid with the standard rotors and pads (which were almost new anyway). The test was all about doing a systems check and making sure the car ran smoothly without any problems (as the car hadn't been driven in anger since we bought it as a write off).




I was able to post a 1:13.2 on some old crappy tyres which squealed like hell with anymore than 5% lock on!! A pretty impressive time considering it is still all but a standard car.




The build is getting closer and closer to being finished.

Rain Light


DBA T3 4000 Rotors and Ferodo DS1.11 Pads


Switch Panel Mockup



Roll Cage will be getting installed next week and then we are very close to be able to get some proper testing under our belts.

[muggo05]

Action shots

[muggo05]

Hot Lap Video

[themarvel2004]

Yep. New tyres a must!!

Your steering looks really light? Have you changed anything there?