Page 1 of 4 123 ... LastLast
Results 1 to 10 of 38

Thread: Window Tint - what to expect (quality)

  1. #1
    Join Date
    Apr 2009
    Location
    Northern Tasmania
    Posts
    480

    Window Tint - what to expect (quality)

    Got my Octavia wagon tinted at one of the big names (Tint a Car - the Bolle film). I'm just wondering how the quality of mine compares to other people's cars - in particular on the Octavia wagon. Apart from the obvious many flaws - every window has multiple small bubbles or dust etc. trapped under the film, it didn't stick along the rear demister and radio wires. There's a 1mm unstuck strip either side of them. Are other's cars the same? I looked at some other cars (different brands) and most didn't have that. I'm worried that this is where it's going to fail. The store owner says that's because the wires are on the surface of the glass and it's impossible for the film to seal on the 'step' of the wire. Same issue on the small panes on the rear doors - an unstuck strip on the rear edge of them.

    Also how picky can I be regarding bubbles do you reckon? This is not the water bubbles that take up to a week to dry up, but very small (1-2mm diameter) ones that can't be removed (it was done three weeks ago). Some have things in them like dust (it was a windy day). They're redoing 'some of it' tomorrow, but I'm still not sure where I stand as the warranty is vaguely worded. I'm talking anything from a few to over 10 on some windows.

    Really hard to photograph, but these capture some of it.
    Window Tint - what to expect (quality)-tint1-jpg
    Window Tint - what to expect (quality)-tint2-jpg
    Window Tint - what to expect (quality)-tint3-jpg
    Window Tint - what to expect (quality)-tint4-jpg
    Last edited by wfdTamar; 25-05-2015 at 08:18 PM.
    2008 Skoda Octavia Elegance TDI 4x4 wagon
    Bluefin 132Kw/385Nm, Racechips Response Control, Haldex Performance controller, H&R anti roll bars, Koni FSD shocks, SuperPro control arms & ball joints, subframe & gearshift mods, Full Dynamat interior, Polk Audio sound, Columbus, Bluetooth, MDI, parking sensors, camera. BBS SR 18x8" w/ 225/40xR18. 3M Crystalline tint.

  2. #2
    Join Date
    Oct 2009
    Location
    Mitchelton, Qld
    Posts
    1,090
    Have you paid for it? If you haven't and you're not happy then don't pay. It's 100% unacceptable if they've got dirt and dust under the tint.

  3. #3
    Join Date
    Mar 2014
    Location
    Melbourne, Victoria
    Posts
    323
    Users Country Flag

    Window Tint - what to expect (quality)

    That's a pathetic excuse of a job TBH.

    My Octavia Wagon was tinted with no such issues or bubbles and it carries a lifetime warranty on the job. Which means if bubbles or any other form of decolouration happens they will replace it.

    I wouldn't pay a cent for that job and take my business elsewhere. They obviously have no clue about fixing a window tint and/or are just plain lazy. They are just giving you excuses.
    Last edited by vEnOm_oz; 25-05-2015 at 08:52 PM.
    Walking Contradiction...

    MY15 Skoda Octavia vRS 162 Race Blue Combi


  4. #4
    Join Date
    Apr 2009
    Location
    Northern Tasmania
    Posts
    480
    Thread Starter
    Do you have the bits along the demister wires that haven't stuck down?

    Yes paid. They do have a 30 day money back guarantee - if you're not happy they'll take it off and refund. I like the tint, just want a good job done. I'd be ok with one or two bubbles on the rear windows (I'd let that slip), but this is ridiculous. The only window without a bubble is one of the small rear panes on the door. Every other window has a flaw, some heaps. It's trickier when it comes to the back window. I'm not sure if the gap along the wires is to be expected. Also the wires can be damaged when removing tint.

    On the other hand they did take $100 off for me removing the door and trim panels (however I've had to do it again now).
    2008 Skoda Octavia Elegance TDI 4x4 wagon
    Bluefin 132Kw/385Nm, Racechips Response Control, Haldex Performance controller, H&R anti roll bars, Koni FSD shocks, SuperPro control arms & ball joints, subframe & gearshift mods, Full Dynamat interior, Polk Audio sound, Columbus, Bluetooth, MDI, parking sensors, camera. BBS SR 18x8" w/ 225/40xR18. 3M Crystalline tint.

  5. #5
    Join Date
    Mar 2014
    Location
    Melbourne, Victoria
    Posts
    323
    Users Country Flag

    Window Tint - what to expect (quality)

    Sorry about the quality of the image, just took it now in the dark. This is the tinted back window, as you can see there is no gap along the wires. I would get the money back if I were you and look somewhere else.

    Last edited by vEnOm_oz; 25-05-2015 at 11:38 PM.
    Walking Contradiction...

    MY15 Skoda Octavia vRS 162 Race Blue Combi


  6. #6
    Join Date
    Apr 2009
    Location
    Northern Tasmania
    Posts
    480
    Thread Starter
    Another thing that pissed me off was how they made me feel like I had a cheek asking for it to be fixed. Instead of 'oh sorry, we'll fix that no worries. Sorry to have put you out', it was 'you have to expect some of those'.

    The customer service was even worse - pretty much implying I was lying or that it was the initial water not dried, or I couldn't possibly be right - 'the workshop is sealed'. Yeah right - just a roller door. They open it to let the car (and dust and ****) in. Supposedly work with it closed (except not when I came back early). No air lock on the reception area - so when the front door is opened any crap can blow through into the workshop. It was really windy the day mine was done. A dog in the workshop!
    2008 Skoda Octavia Elegance TDI 4x4 wagon
    Bluefin 132Kw/385Nm, Racechips Response Control, Haldex Performance controller, H&R anti roll bars, Koni FSD shocks, SuperPro control arms & ball joints, subframe & gearshift mods, Full Dynamat interior, Polk Audio sound, Columbus, Bluetooth, MDI, parking sensors, camera. BBS SR 18x8" w/ 225/40xR18. 3M Crystalline tint.

  7. #7
    Join Date
    Apr 2009
    Location
    Northern Tasmania
    Posts
    480
    Thread Starter
    Great thanks for that photo/ammunition. I'm going back tomorrow so need to be able to say it can be done properly. Problem is there are very few places here that do it. Might need to look somewhere else in the state.
    2008 Skoda Octavia Elegance TDI 4x4 wagon
    Bluefin 132Kw/385Nm, Racechips Response Control, Haldex Performance controller, H&R anti roll bars, Koni FSD shocks, SuperPro control arms & ball joints, subframe & gearshift mods, Full Dynamat interior, Polk Audio sound, Columbus, Bluetooth, MDI, parking sensors, camera. BBS SR 18x8" w/ 225/40xR18. 3M Crystalline tint.

  8. #8
    Join Date
    Mar 2014
    Location
    Melbourne, Victoria
    Posts
    323
    Users Country Flag
    Mate, I understand your predicament. Come summer time those bubbles are going to expand and create a horrible artwork on your windows, to put it mildly.
    Walking Contradiction...

    MY15 Skoda Octavia vRS 162 Race Blue Combi


  9. #9
    Join Date
    Nov 2014
    Location
    Melbourne
    Posts
    97
    Users Country Flag
    I got mine tinted by tint a car in Melbourne with no complaints. Don't take bad workmanship from them as its your hard earned cash.
    2011 T5 Mulitivan Comfortline 103kw ,2009 Golf Tdi Comfortline 103kw,2005 Golf Mk5 GTI Stage 1 220BHP (UK),2004 Golf GT TDI 140BHP (UK),1995 Golf Mk3 GTI 120BHP (UK), 1980 Escort Mk2 RS2000(South African), 1980 Opel GTE 148Kw (South African), 1979 Golf Mk1.

  10. #10
    Join Date
    Apr 2009
    Location
    Northern Tasmania
    Posts
    480
    Thread Starter

    Yeah, I know. I did my house windows myself and did an ok job. Only a bit rough along the imperfect edge. I thought I should get people that do it all the time to make sure of a good job, but just because people have been doing it for xx years doesn't mean they have been doing it right all that time. Particularly here in Tassie 'rough enough is good enough' seems to be the standard for any trade.
    2008 Skoda Octavia Elegance TDI 4x4 wagon
    Bluefin 132Kw/385Nm, Racechips Response Control, Haldex Performance controller, H&R anti roll bars, Koni FSD shocks, SuperPro control arms & ball joints, subframe & gearshift mods, Full Dynamat interior, Polk Audio sound, Columbus, Bluetooth, MDI, parking sensors, camera. BBS SR 18x8" w/ 225/40xR18. 3M Crystalline tint.

Page 1 of 4 123 ... LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |