Support VWWC

Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: Skoda Octavia Wheel Weights?

  1. #1
    Join Date
    Dec 2012
    Location
    Sutherland Shire, Sydney
    Posts
    1,472
    Users Country Flag

    Skoda Octavia Wheel Weights?

    Brad reminded me to sort this out - so here are the facts:

    Factory Neptune wheels - 18*7.5 ET51 - 13.4kg



    Replica Audi RS4 - 18*8 ET45 - 11kg



    Replica Golf R - 18*8 ET45 - Approx same as Audi above from memory

    2012.1 Skoda Octavia VRS DSG Wagon - Carbonio cold air intake and pipe - HPA Motorsports BBK 355mm rotors 6 pot calipers
    APR Stage II ECU - APR 3" exhaust down pipe & high flow catalyst
    APR/HP Roll bars - Eibach springs and Bilstien shocks
    Supaloy lower control arms - Enkei 18*8 Wheels

  2. #2
    Join Date
    Feb 2010
    Location
    Camden NSW
    Posts
    1,270


    These are roughly 13-14 kgs each...(plus tyres of course)
    (MK6 GTI Adidas replicas)
    2018 Ralyee Green RS wagon. Fully optioned.
    Previous vehicles:2015 Volvo V60 Polestar (my one detour from VW/Skoda!)
    2013 Platin grey RS wagon / 2012 White Polo GTI / 2009 Black 125 Tiguan

  3. #3
    Join Date
    Dec 2012
    Location
    Sutherland Shire, Sydney
    Posts
    1,472
    Users Country Flag Thread Starter
    Also note, Tigger's wheels are 19" so you would expect them to be a little heavier than a 18"
    2012.1 Skoda Octavia VRS DSG Wagon - Carbonio cold air intake and pipe - HPA Motorsports BBK 355mm rotors 6 pot calipers
    APR Stage II ECU - APR 3" exhaust down pipe & high flow catalyst
    APR/HP Roll bars - Eibach springs and Bilstien shocks
    Supaloy lower control arms - Enkei 18*8 Wheels

  4. #4
    Join Date
    Dec 2012
    Location
    Sutherland Shire, Sydney
    Posts
    1,472
    Users Country Flag Thread Starter
    Today I purchased a lovely set of wheels for my Octavia - Enkei Raijin

    This is my favourite wheel spoke pattern
    These wheels are the exact size I wanted, 18 x 8 ET45
    (Normally this spoke pattern is only available in 18 x 8.5 or 19 x 8.5)

    These wheels weight in at, drum roll please, 9.1kg!

    They are well clear of my BBK - very important
    They have wonderful machined tapers for the bolts
    (Unfortunately the CB is wrong so I have to use hub centric rings)

    I think I'm going to get them pained gun metal - similar to the colour of my car

    Last edited by Martin; 09-04-2013 at 08:29 PM. Reason: Weight corrected
    2012.1 Skoda Octavia VRS DSG Wagon - Carbonio cold air intake and pipe - HPA Motorsports BBK 355mm rotors 6 pot calipers
    APR Stage II ECU - APR 3" exhaust down pipe & high flow catalyst
    APR/HP Roll bars - Eibach springs and Bilstien shocks
    Supaloy lower control arms - Enkei 18*8 Wheels

  5. #5
    Join Date
    May 2005
    Location
    Gosford Central Coast NSW
    Posts
    4,386
    enkei have been making wheels light for a long time Good choice.

    The S-line audi ronals I just put on mine in 17x7.5 weigh what feels like a lot..... I think most of hte factory wheels sacrifice weight for strength, as all the factory rims I've used have been solid as anything (I drive on a lot of bad roads).

    At the other extreme, I still have a set of 16x7.5 speedlines (used to run on my mk3 golf) that are feather light but prone to damage.
    '07 Touareg V6 TDI with air suspension
    '98 Mk3 Cabriolet 2.0 8V
    '99 A4 Quattro 1.8T

  6. #6
    Join Date
    Nov 2010
    Location
    NSW
    Posts
    324
    Quote Originally Posted by Martin View Post
    Today I purchased a lovely set of wheels for my Octavia - Enkei Raijin

    This is my favourite wheel spoke pattern
    These wheels are the exact size I wanted, 18 x 8 ET45
    (Normally this spoke pattern is only available in 18 x 8.5 or 19 x 8.5)

    These wheels weight in at, drum roll please, 9.5kg!

    They are well clear of my BBK - very important
    They have wonderful machined tapers for the bolts
    (Unfortunately the CB is wrong so I have to use hub centric rings)

    I think I'm going to get them pained gun metal - similar to the colour of my car

    Damn i love those Enkeis. Lately I've been eying the Kojin's too.
    2012 Yeti 77TSI, Candy White
    ---
    ydad.com.au: musings of a dad growing up - the blog.
    cbay.com.au: photography, video, design - creations.

  7. #7
    Join Date
    Dec 2011
    Location
    Bowral, NSW
    Posts
    1,706
    Users Country Flag
    Quote Originally Posted by gldgti View Post
    The S-line audi ronals I just put on mine in 17x7.5 weigh what feels like a lot..... I think most of hte factory wheels sacrifice weight for strength, as all the factory rims I've used have been solid as anything (I drive on a lot of bad roads).
    Imagine this: VW/Audi/Skoda recall - Wheels will fall apart if you hit a pot hole.

    They'd have to come up with some pretty fancy marketing to make people forget that!...
    2012 Octavia vRS TDI. Darkside big turbo, 3bar tune, other stuff. 200kW/650Nm.
    1990 Mk1 Cabrio. 1.9 IDI w/ 18PSI.
    1985 Mazda T3500 adventuremobile. 1973 Superbug. 1972 Volvo 144 in poo-brown.
    Not including hers...

  8. #8
    Join Date
    May 2005
    Location
    Gosford Central Coast NSW
    Posts
    4,386
    Just out if interest more than anything, I know some people often say "I have this wheel and theres no scrubbing" but sometimes I do wonder if these people do any real driving..... reason being I think the fitment on my octavia right now is still relatively conservative (compared to brads photo) and I can still say for certain that it scrubs on the rear over big bumps or when there is a person in the back over smaller bumps.

    my fitment is 17x7.5 ET45 with a 235/45 tyre, and I have eibach pro-kit.... just FYI for people wanting to get into a new set of wheels.
    '07 Touareg V6 TDI with air suspension
    '98 Mk3 Cabriolet 2.0 8V
    '99 A4 Quattro 1.8T

  9. #9
    Join Date
    Jan 2012
    Location
    Sydney, NSW
    Posts
    1,371
    Users Country Flag
    really like those RS4s on an Octavia

  10. #10
    Join Date
    Dec 2012
    Location
    Sutherland Shire, Sydney
    Posts
    1,472
    Users Country Flag Thread Starter

    Quote Originally Posted by zei20t View Post
    really like those RS4s on an Octavia
    Thanks - I do like them also - they are now my track day wheels

    Quote Originally Posted by gldgti View Post
    Just out if interest more than anything, I know some people often say "I have this wheel and theres no scrubbing" but sometimes I do wonder if these people do any real driving..... reason being I think the fitment on my octavia right now is still relatively conservative (compared to brads photo) and I can still say for certain that it scrubs on the rear over big bumps or when there is a person in the back over smaller bumps.
    My Octavia (wagon) is lowered 20mm~25mm and I've never had a rear (or front) wheel rub on anything over bumps or at full lock

    Quote Originally Posted by gldgti View Post
    my fitment is 17x7.5 ET45 with a 235/45 tyre, and I have eibach pro-kit
    Wow, 235 fits on a 7.5" rim, that's useful to know
    Love the Eibach Pro gear
    2012.1 Skoda Octavia VRS DSG Wagon - Carbonio cold air intake and pipe - HPA Motorsports BBK 355mm rotors 6 pot calipers
    APR Stage II ECU - APR 3" exhaust down pipe & high flow catalyst
    APR/HP Roll bars - Eibach springs and Bilstien shocks
    Supaloy lower control arms - Enkei 18*8 Wheels

Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |