dArK5hAd0W's Timeline

[MountainBikeMike]

bhahha......that's the thing about yellow - it has so many shades, it depends on the angle, the lighting, the dirt/grime!!!!



with regards to the remsa & ate pads - what sorta prices am i looking at for all four corners?
i want to replace my pads with ceramic ones.

and what r vRS the part numbers? i read somewhere the part numbers r different to that sourced on the GTi.

Just call GSL and talt to matt. He knows whats up. $209 all round and I didn't get charged freight. What

[dArK5HaD0w]

60,000 kms major service done today, including dsg service - final damage was $875 @ Canberra VW Centre.

Brake pads r still good.

[dArK5HaD0w]

these r the wheels i WANTTTT!!!
unfortunately, at the rate my missus is scratching the current neptunes, it makes me cringe at the thought of her scratching these!!
i'm gonna have to buy her another car with which she can scratch the rims, before i buy a set of these.
one day......

[cbay]

are these 3SDM's, Darkshadow?

[dArK5HaD0w]

are these 3SDM's, Darkshadow?

not sure.
i think they're VMR wheels - 710 to be specific.

[dArK5HaD0w]

so a heafty package arrived at my place today - 35 sq ft Sound Deadener and FREE 35 sq ft underfelt.

any tips on removing the carpet above the wheel arches....the sidewall part?
the spare wheel area and under the rear seat is simple enough.

[cbay]

not sure.
i think they're VMR wheels - 710 to be specific.

Ah maybe! There are quite a number of manufacturers with this kind of design, I thought they were these:

0.01 Collection / 3SDM Wheels Co

[brad]

any tips on removing the carpet above the wheel arches....the sidewall part?
the spare wheel area and under the rear seat is simple enough.

IIRC, the top is held in by the hatch seal & the bottom is kind of wedged in there. You'll work it out once you start.

35 sq ft is like 3 sq m? You reckon you'll need all that?

I find that after doing the rear (in timber floor underlay), it acentuated the amount of noise from the front tyres. If you can do something up front in the wheel arches you'll notice the difference.

[dArK5HaD0w]

IIRC, the top is held in by the hatch seal & the bottom is kind of wedged in there. You'll work it out once you start.

so i decided to have a go today........

wasn't too bad once i got going. just did one half for now.
will to the rest on the weekend.

i've used 2 (out of 10) sheets sofar. planning to put some under the rear seats too, along with the carpet lining felt.

[rjg]

Be interested to see how this turns out.

Sent from my GT-I9305T using Tapatalk