What have you done to your mk4 (golf/bora) today?

[Lonewolf1983]

got a call from UPS today...
What address would you like it delivered to?
78...
collingwood st?
yes...
ok, it will be delivered today

Still no package, and online tracking says its in transit, last seen in kentucky.

[gavs]

Good on you mate, stick it to em! Bloody shocking roads, i'll do my old 80year old man sitting on the porch in a rockingchair speach and say to send the dole bludgers out to a farm, make them work then spend that wasted tax on the roads...and an autobarn while they're at it. Haha! It's shocking though, the other day I was driving on a road through newfarm, and this bit of road they had cut and oviously planned to resurface just had the biggest 90 degree lip on it, made the .:R make an awful bang (nearly brought a tear to my eye...not really, but still), it's shocking, could have easily gave me a flat and/or done some damage to my suspensipon. Bastards!

I just fitted new strut mounts on my car when down here in Melb, they decided it would be a good idea to have the new road surface on Ferntree gully rd 30mm higher than the old surface, on both sides of the road, without blending it with the existing road and leave it like this for 3 weeks! In one day, the trip to and from work resulted in 1 month old strut mounts going from fine to busted and soggy. Good luck getting anything out of the a*se reamers that are Vic Roads and the Brumby Government! Hopefully you have more luck with your RTA up there Manaz!

[83_SUS]

my double din facia arrived and installed this arvo looks much better

[Lonewolf1983]

Cams have landed

[83_SUS]

also installed the ipod cable. have it coming out just above the ashtray lid

[Back Door Shenanigans.]

also installed the ipod cable. have it coming out just above the ashtray lid

What head unit you got? Alot easier to get it out the ashtray then the glove box. I put it in the glove box and it was a PITA.

Fitted my resistor plate today. Pain in the ass so i removed the bumper to help which was supprisingly easy.

[McDub]

what's a resistor plate for?
and why do people insist on using imageshack, pop up city garbage website!

with the grill, is that still there in that pic so that you don't have to remove the hood release latch?
cos removing the latch is a P.I.T.A

[83_SUS]

What head unit you got? Alot easier to get it out the ashtray then the glove box. I put it in the glove box and it was a PITA.

Fitted my resistor plate today. Pain in the ass so i removed the bumper to help which was supprisingly easy.
http://img96.imageshack.us/img96/9566/p1050232i.th.jpg
http://img693.imageshack.us/img693/1...050226i.th.jpg
http://img339.imageshack.us/img339/2333/p1050234.th.jpg
http://img204.imageshack.us/img204/4...050229d.th.jpg

have a pioneer avhp4250dvd and i just drilled a hole big enough for the usb and aux plug to squeeze through just above the ashtray lid and just below the OBD port in the plastic

[dainese]

What head unit you got? Alot easier to get it out the ashtray then the glove box. I put it in the glove box and it was a PITA.

it is a bastard isn't it?

i have a trick though, you can leave the rear section as is, and only remove the 4 side screws for the front section of the centre tunneling trim.

i haven't put it back yet, but i might have to take it off anyway...

either way, removing both glovebox and that front centre tunnel trim - reduced ALOT of rattles and creaks.

[Back Door Shenanigans.]

Whoop i mean not the glove box the arm rest, which is made out of aluminium lol with little holes or ways to route the cables. Glove box wasn't too hard it allready had a pre punched hole in it.