I'll ask the ECS guys for you.Quote:
Originally Posted by McDub
Printable View
I'll ask the ECS guys for you.Quote:
Originally Posted by McDub
cheers
some time back i got the the yellow BFI (65a) dogbone bushes installed, and cabin noise/vibration was far too much for me, could feel vibrations through my chair and the cabin would drone at low revs. so i went back to stock, but recently my gear changes have been quite poor and restrictive, particularly while changing going over bumpy road.
Anyway today i copied bujna's advice and kept the smaller stock bush in and replaced the larger bush with the BFI one, and cabin noise is not a problem at all, and it seems to be shifting smoother now. still some wheel hop but that's to be expected. happy with the result.
actually had to buy a new hydraulic jack to do it cos the old one we had basically broke and started leaking while pumping it...
Replaced standard single horn with dual Stebel setup - no more Roadrunner! :)
got the new slotted rotor and qfm pads fitted through the week and currently have not got the sensor in the front till i get new ones.... just finished polishing her this very minute im stuffed its so hot
When I got my QFM pads installed, we just cut the sensor wire off the old set of pads and shorted it out, then plugged it back in... no probs since, and that was over 6mths agoQuote:
Originally Posted by 83_SUS
well the brake place decided to throw the old ones out now didnt they :furious:Quote:
Originally Posted by goodfella
grrrr :brutal: :2ar15smilie::ak::negev: :2gunsfiring_v1: :metal-slug::rl:Quote:
Originally Posted by 83_SUS
can anybody help the brother out?
Quote:
Originally Posted by goodfella
I would be surprised if Jimmy doesn't have one floating about.
Gavin
on thursday my gearbox went kaput :tear:
who is jimmy?Quote:
Originally Posted by h100vw