What have you done to your mk4 (golf/bora) today?

[dylan8]

Not today but two days ago, noticed a massive grinding noise from the front left, when turning left.

Took the wheel off to find my sway bar not connected to the end links and only the bolt just hanging there... Lucky no damage as far as i can tell, and also managed to find a nut floating around at home that fitted.

Warning to all idiots like me, don't rely on a rattle gun and quick inspections when playing with your car!

[Manaz]

Cleaned steering wheel with Zaino Z9 cleaner. Looks and feels brand new.
Cleaned seats with Z9 and conditioned with Z10. This stuff is awesome!

Also managed somehow to get 3 hideously large stone chips on drivers door by a passing truck.

Might have to give that stuff a go - the Oroton leather cleaner/conditioner (from one of my wife's handbags) is only so good...

[IanJ]

Just had the timing belt and full service done at Golfwagen. Superb customer service (my wife had to take it as I'm working away) and all for a reasonable price.

Thanks guys.

[geoff_gti]

geoff, keep us updated

for myself, im going to rip out the box tomorrow morning or today and send it away and hopefully it'll be 113! hopefully more so i can get car together before melb next week!

Pierre did you need to trim the ends down at all? Hopefully that's only necessary on the Polos. Also wondering if you put a screw in every tab - there's 9 on each side! - or if every 2nd is ok etc? Gonna have a look at it tomorrow

Cheers

[Dub_Star_V6]

Preventative (metal impeller) water pump swap @ 150k booked in.

And yet another char-grilled ignition coil bites the dust. What is it with these coils? Almost tricked us and gave us both a heart-attack, but thankfully JMac was all over it...

[fuzion]

Pierre did you need to trim the ends down at all? Hopefully that's only necessary on the Polos. Also wondering if you put a screw in every tab - there's 9 on each side! - or if every 2nd is ok etc? Gonna have a look at it tomorrow

Cheers

monday it'll be looked at, not fussed right now .. it'll be sorted by lunch monday or tues morning latest. no biggie! its all gooooooood

i could do a special post of what my cars going is ..... here we go!

car entered mech area
placed on hoist
hoist lifted vehicle into air
vehicle was taken a look at from under side
wheels needed to be taken off
wheels were taken off
arms and cvs had to be unbolted
arms and cvs were unbolted
subframe had to be removed
subframe removed
gearbox needed to be taken out
gearbox was removed and taken out
gearbox is laying on floor
floor of workshop has gearbox
subframe is black (did i mention that?)

LOL

But in all seriousness Gearbox is on floor enjoying itself until monday and we'll go from there. Possibly may try detail it whilst on hoist tho which could be interesting tomorrow.

[Manaz]

Picked up the Bora with PSS9s and adjustable rear control arms on it, and then went and got an alignment done. Gonna let them settle a bit, then back to the workshop to have them adjusted for final(ish) height.

[fuzion]

I also fitted my vented fender liner..

after reading this the passenger side screw came of my fender liner and its my tyre has chomped right through it almost LOL..

[fuzion]

Picked up the Bora with PSS9s and adjustable rear control arms on it, and then went and got an alignment done. Gonna let them settle a bit, then back to the workshop to have them adjusted for final(ish) height.

hav eyou posted them yet? otherwise just call me ill collect. ps i have a kvw come for you this week lol (FINALLY YES!) (yes useless lol)

And i will also be testing the Keyless Entry Systems as well for mk4/mk5's .. thought id mention that.
For those who are thinking "but i already have keyless entry", its proximity entry which means as you walk up to the vehicle the vehicle unlocks itself without the press of any buttons and locks the vehicle as you walk away as well. :p More info this week hopefully!

[Yevvy]

Picked up the Bora with PSS9s and adjustable rear control arms on it, and then went and got an alignment done. Gonna let them settle a bit, then back to the workshop to have them adjusted for final(ish) height.

i envy you mate. its a long way before i can afford mine
any pics?