You can get them made Ray its not that hard!
Printable View
You can get them made Ray its not that hard!
too much trouble to get them made.. rather buy it off the shelf like these 1's..Quote:
Originally Posted by DubSteve
it would cost about $200.00 to have them made. 2 hours labor
Quote:
Originally Posted by DUB 20V
$200 :eek: lol
how much r these kits u bought..
they only have 4 holes? r they universal?
Quote:
Originally Posted by 1DUB2C
yeah there are only 4 holes cause that is how many hold the axel to the car, these dont go under the wheel,
lol, they don't sit between the hub and the rim. if someone put them there your wheel would wobble as it rotated. think about it...let the wheel turn 180 degrees and you will have the top of the wheel sitting out further than the bottom. also, your wheel lugs and nuts would be put under serious strain from not sitting flush.Quote:
Originally Posted by 1DUB2C
they go on the underside of the hub.
adrian~!!!! hahahahhahahahahahhaha thanks !!! I havent laughed so much in ages! hahahahhahahahhahahhahahahaQuote:
Originally Posted by DUB 20V
good one ray!!! hahahhahahahhahahahahahahahahahahahhahahahhaahha :duh:
Why wouldn't you just use one of the Ingalls adjustable kits?
http://www.ingallseng.com/parts/30000.htm
http://www.vwwatercooled.com.au/forums/
Plenty of VW ones to chose from http://www.ingallseng.com/cars/vw.html
Pete
Oh and Ray...just for the record...
http://www.vwwatercooled.com.au/forums/
cause you need the cut out for the abs sensor:) good for older cars tho.Quote:
Originally Posted by Peter Jones