Hi guys,
I'm wondering if these wheels will fit on my MK4 1.6 Golf without any modifications (and if the price is right!) ? It's from a Subaru Liberty.
http://www.vwwatercooled.com.au/foru...20150426_2-png
Many thanks!
Printable View
Hi guys,
I'm wondering if these wheels will fit on my MK4 1.6 Golf without any modifications (and if the price is right!) ? It's from a Subaru Liberty.
http://www.vwwatercooled.com.au/foru...20150426_2-png
Many thanks!
Yeah man, they should fit no problem. Check what the offset is with the sellerQuote:
Originally Posted by lemontree
Thanks SLAJ. He said: 215/45/17 if that means anything?
Nah that's the tyre size. Offset should be written on the inside of the wheel and will say "et" followed by a number, like et35. As long as it's something between et20 and et40 you should be fineQuote:
Originally Posted by lemontree
most of that model are 7et45 or 55 from memory. (there is a few at et35 but not usually on subarus)
first of all the centre bore will be too small and need to be machined out.
if they are the et45 or 55 they will be either a backwards step on the bigger oem mk4 wheels, or might not fit at all if they are 55
id say a bit expensive being they are standard wheel on some subarus, but depends how much you want them etc
Hello Dylan and SLAJ thanks for the input. The seller mentioned it's a 55. Would this be too big? If what you're saying is true, Dylan, maybe it's better if I look elsewhere for an ET range under 40?
and if anyone knows wheels I'm after that fits my Golf, let me know :) cheers
7et55 might JUST fit, but will look pretty average
Aim for around 7-8et30-40 if you are unsure
Car: Bora V5 FWD
Front: 17x8 ET0 (after 35mm adapter) 205/45/17 GT Radial
Rear: 17x9 ET8 (after 27mm adapter) 215/45/17 Nankang
Arch height to ground Front: 24"
Arch height to ground Rear: 24"
Fenders Rolled: Front only
Fenders Pulled: No
Camber: -4 degrees in the front from R32 control arms and hubs and KMAC adjustable Camber Tops. -3.5 degrees in the rear from IDF drop plates.
http://www.vwwatercooled.com.au/foru...8d42c696-1.jpg
http://www.vwwatercooled.com.au/foru...2e8a9a9b-1.jpg
http://www.vwwatercooled.com.au/foru...4ea75e0e-1.jpg
better. may still need the centre bore altered and bolt holes drilled out.Quote:
Originally Posted by lemontree