VW bora wheel fitment

[kapowww]

Hey kapowww I remembered you had some Miro wheels? Were they these ones?

Thinking of having them since the CB is right. How were they sitting without the spacers if you have any on?
Cheers

I had the Miro STP-1s but I think now they've been superseded by the Miro Type 380 but they had the same size and fitment of the ones you linked. Not sure about the face of the Miro 368 wheels but the 380s didn't clear my brake calipers so that's why I needed 5mm on the front and 10mm on the rear. Should be similar.

The rears would have looked better without the spacers. I sold them to a friend who has a Mk4 GTI and he needed a 5mm spacer on the front but none on the rear! What a jerk..

[rokle]

Thanks. Have to think about this over again.

[tulip50]

It is depend on the height of the car.

[bundabora]

Hey Matey... I thought you had a baby on the way and were going back to stock...? Stop eyeing off those wheels...

I've been eyeing these wheels too but not sure if they'll clear my brakes. they should due to the concavity but you can be my guinea pig. =]

[kapowww]

Hey Matey... I thought you had a baby on the way and were going back to stock...? Stop eyeing off those wheels...

Exactly! I'm so stupid and impulsive sometimes lol . I actually just bought a set of 17" wheels instead, a decent compromise IMO.. 18s look the biz, but ride like shiz.

EDIT: Actually I don't know if 17 will be much of an improvement in ride quality but I like to pretend it will be.

[dylan8]

Exactly! I'm so stupid and impulsive sometimes lol . I actually just bought a set of 17" wheels instead, a decent compromise IMO.. 18s look the biz, but ride like shiz.

EDIT: Actually I don't know if 17 will be much of an improvement in ride quality but I like to pretend it will be.

should be if you go up to a 45 profile

[kapowww]

should be if you go up to a 45 profile

Yeah I'm gonna go 225 45 17 all around.