Results 1 to 6 of 6

Thread: In Sydney and need a throttle body alingment

  1. #1
    Join Date
    Oct 2010
    Location
    glebe, nsw
    Posts
    3
    Users Country Flag

    In Sydney and need a throttle body alingment

    Hi, I just cleaned out my throttle body on a Mk4 1.6l. It Idles a little high (1150) with occasional searching. If anybody out there has vagcom and can help me out that would be awesome. thanks.

  2. #2
    Join Date
    Oct 2008
    Location
    Sydney
    Posts
    633
    did it idle high before or after you cleaned it?
    If i'm not mistaken, they align themselves after a while anyway? maybe 30 min battery disconnect to reset the ecu does will do it? (prob not, i'm sure someone here will know)

    I've had a throttle body in my car unalligned for about 3 months.
    though saying that, i've got a cable just for this weekend so will perform an alignment on it myself.
    I'd offer to do it if you dropped by tomorrow but it's not my cable plus i don't really know what i'm doing!

  3. #3
    Join Date
    May 2005
    Location
    Melbourne, Mexico
    Posts
    8,979
    Users Country Flag
    Use the cable Paul if you want. Check out the Ross Tech site for the instructions.

    Gavin

  4. #4
    Join Date
    Oct 2010
    Location
    glebe, nsw
    Posts
    3
    Users Country Flag Thread Starter
    thanks, you guys are awesome. The high idle started afrer i cleaned it seems to ne drinking a healthy amount of fuel. what is your beer of choice?

  5. #5
    Join Date
    Oct 2008
    Location
    Sydney
    Posts
    633
    thanks for offer, but no need for beer it's a 1 minute job. check your pm

  6. #6
    Join Date
    Oct 2008
    Location
    Sydney
    Posts
    633

    chris here's your fault codes:
    Saturday,20,November,2010,14:03:07:05691
    6 Faults Found:

    00557 - Pressure Switch; Power Steering (F8
    29-00 - Short to Ground
    00515 - Camshaft Position (Hall) Sensor (G40)
    03-00 - No Signal

    00533 - Idle Speed Regulation
    19-10 - Lower Limit - Intermittent
    00520 - Air Mass / Air Flow Sensor (G70)/(G19)
    31-10 - Open or Short to Ground - Intermittent
    00523 - Intake Air Temp Sensor (G42)
    30-10 - Open or Short to Plus - Intermittent
    00537 - Lambda (Oxygen Sensor) Regulation
    18-10 - Upper Limit - Intermittent

    Readiness: N/A
    the one in bold being the one that re-appeared after they were cleared.


    copy this text and paste into notepad and save file as *.csv
    HTML Code:
    ,Group A:,'010,,,,Group B:,'005,,,,Group C:,'007
    ,,Lambda,Lambda Probe,Activated Charcoal,Lambda Correction,,Engine Speed,Voltage Supply,Coolant,Intake Air,,Throttle Valve,Idling control,Idling control,Operating
    ,TIME,Regulation,Voltage,Valve 1 Duty Cycle,Tank Venting active,TIME,,,Temperature,Temperature,TIME,Angle,learnt value,learnt value,Condition
    Marker,STAMP, %, V, %, %,STAMP, /min, V,°C,°C,STAMP,°,,,
    ,0.97,-8.0,0.63,2.7,0.0,1.99,1888,13.81,94,43,2.60,7.5,1.07,1.00,    1000
    ,3.65,-6.0,0.12,2.7,0.0,4.63,1888,13.81,94,43,5.26,8.0,1.07,1.00,    1000
    ,6.26,-5.0,0.10,2.7,0.0,7.25,1888,13.41,94,43,7.87,7.5,1.07,1.00,    1000
    ,8.82,-8.0,0.59,2.7,0.0,9.87,1888,13.81,94,43,10.54,7.5,1.07,1.00,    1000
    ,11.54,-5.0,0.14,2.7,0.0,12.52,1856,13.81,94,43,13.17,7.5,1.07,1.00,    1000
    ,14.26,-6.0,0.10,2.7,0.0,15.34,1888,13.81,94,43,15.98,8.0,1.07,1.00,    1000
    ,17.03,-8.0,0.72,2.7,0.0,18.10,1856,13.81,95,43,18.71,8.0,1.07,1.00,    1000
    ,19.66,-7.0,0.74,2.7,0.0,20.65,1888,13.91,96,43,21.27,7.5,1.07,1.00,    1000
    ,22.33,-5.0,0.10,2.7,0.0,23.35,1856,13.61,96,43,23.99,7.5,1.07,1.00,    1000
    ,24.93,-6.0,0.10,2.7,0.0,25.88,1792,13.61,96,43,26.51,7.5,1.07,1.00,    1000
    ,27.52,-8.0,0.70,2.7,0.0,28.59,1792,13.71,97,43,29.24,7.5,1.07,1.00,    1000
    ,30.21,-8.0,0.63,2.7,0.0,31.27,1792,13.71,98,43,31.90,7.5,1.07,1.00,    1000
    ,32.99,-6.0,0.10,2.7,0.0,33.96,1792,13.71,98,43,34.57,7.5,1.07,1.00,    1000
    ,35.60,-5.0,0.16,2.7,0.0,36.66,1792,13.71,97,43,37.27,7.5,1.07,1.00,    1000
    ,38.24,-6.0,0.74,2.7,0.0,39.21,1792,13.71,97,43,39.80,7.5,1.07,1.00,    1000
    ,40.77,-5.0,0.18,2.7,0.0,41.84,1792,13.61,96,43,42.52,7.5,1.07,1.00,    1000
    ,43.48,-6.0,0.74,2.7,0.0,44.46,1856,13.30,96,43,45.06,8.0,1.07,1.00,    1000
    ,46.00,-6.0,0.10,2.7,0.0,47.02,1888,13.81,96,43,47.69,7.5,1.07,1.00,    1000
    ,48.75,-6.0,0.08,2.7,0.0,49.83,1856,13.81,95,43,50.49,8.0,1.07,1.00,    1000
    ,51.49,-7.0,0.63,2.7,0.0,52.59,1856,13.81,94,43,53.23,7.5,1.07,1.00,    1000
    ,54.16,-8.0,0.55,2.7,0.0,55.24,1856,13.71,94,43,55.87,7.5,1.07,1.00,    1000
    ,56.84,-6.0,0.12,2.7,0.0,57.79,1824,13.81,94,43,58.40,7.5,1.07,1.00,    1000
    ,59.33,-7.0,0.72,2.7,0.0,61.33,1888,13.81,94,44,61.96,7.5,1.07,1.00,    1000
    ,62.92,-8.0,0.66,2.7,0.0,63.96,1856,13.81,94,44,64.60,7.5,1.07,1.00,    1000
    ,65.63,-7.0,0.64,2.7,0.0,66.66,1856,13.81,95,44,67.34,8.0,1.07,1.00,    1000
    ,68.40,-6.0,0.31,2.7,0.0,69.37,1888,13.81,96,44,69.99,7.5,1.07,1.00,    1000
    ,71.06,-6.0,0.12,2.7,0.0,72.05,1888,13.81,96,44,72.67,8.0,1.07,1.00,    1000
    ,73.67,-6.0,0.14,2.7,0.0,74.66,1792,13.51,96,44,75.27,7.5,1.07,1.00,    1000
    ,76.31,-7.0,0.72,2.7,0.0,77.28,1760,13.61,97,44,77.88,7.5,1.07,1.00,    1000
    ,78.86,-6.0,0.12,2.7,0.0,79.83,1792,13.71,98,44,80.47,7.5,1.07,1.00,    1000
    ,81.46,-5.0,0.12,2.7,0.0,82.47,1792,13.71,98,44,83.10,7.5,1.07,1.00,    1000
    ,84.15,-5.0,0.08,2.7,0.0,85.18,1792,13.51,98,44,85.78,7.5,1.07,1.00,    1000
    hope you can sort it out, sure is idling high!!!
    I thought i logged your maf readout too but seems i didn't
    Last edited by McDub; 20-11-2010 at 03:55 PM.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |