Suspension should fit if the tt is awd too.
Staggered wheels can be as long as the tyre rolling diameter is within a certain %. Think its 3-5%
Hi, would anybody be able to shed some light if you can run a staggered wheel setup on a Bora 4motion? i ran a staggered setup on my audi S4 a few years back and didn't have any issues with the quattro system. Also will mk1 audi TT coils/suspension fit on the Boras?
Thanks you in advance,
Dev.
Suspension should fit if the tt is awd too.
Staggered wheels can be as long as the tyre rolling diameter is within a certain %. Think its 3-5%
I would be careful as this may affect your centre diff, with a 4wd it is best to run same size front to rear
thanks guys! appreciate the opinions.
The 4 motion doesnt have a centre diff..
FYI, I ran 215/40 up front and 235/40 upfront with no issues.
yea I'm with ffoff i was recently running 17x7.5 215/45 up front and 17x8.5 225/45 on the rear
and I'm not sure about the centre diff but i think ffoff is right about the centre diff as well
As said before anything up to 5% is fine . Realistically you just want the rolling diameters to be the same . Have personally ran 225s on front and 245 rears without any issue. They don't really have a center diff more of a transfer case deal with a clutch in the haldex unit to regulate power going to the rear wheels.
-2003 Vw Bora Vr6 4-Motion - Back From The Dead LiNk tO PhOtO Thread
-1993 Nissan Nx-R , SR20DE+T Project.
-1993 Kawasaki ZZR250 (grey import)"The StreetFighter"
Bookmarks