New Beetle - adding cruise control

[SteveG]

Hi Sanc. Been a loooong time since I did that job so I can't remember too well, but have just been over this thread and the install notes again to refresh my memory. My daughter sold the car so I can't even look at it now...

I think the key thing was that for the BFS engine code it was the T121 connector that I needed to find - not the T10e one.
And I needed the extension loom from stalk loom to ECU.
T121 connector is on the ECU itself.

From memory once I worked that out and had the extension loom from the control stalk loom across to the ECU on the LH side it was all very simple.

Hope that helps.
Steve

[Sanc]

Dear Steve,

Thank you, I have to try again. My B plan is to follow the wires from the turn signal bar to ECU. If there isnt any connector I will cut the loom cover, find the proper wires, strip them and make join the proper new ones.

I’m so glad because I had to reach you!

Have a nice day!

Sandor

[SteveG]

Hey Sandor - didn't think about you being in Hungary - so will drive on the right side of the road.
In Australia we drive on the left, so driver's seat is on the right which is why I needed the extension loom to reach the ECU on the left side of the car. You won't need one.

Sorry I can't be more help

Steve