Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Need clutch

  1. #1
    Join Date
    Nov 2007
    Location
    NSW
    Posts
    146

    Clutch and Gearbox Q's. 1.6L

    Any advice on replacement brand or dealer for new clutch for Golf 1.6l GL?
    Near Wollopngong or Sydney.. Got priced $560 for clutch kit + GST and $500 for flywheel if needs replacing!?!?!
    Last edited by mikk@; 08-03-2008 at 01:04 PM.

  2. #2
    Join Date
    Aug 2007
    Location
    Dont poke and hope, scan, smoke and scope
    Posts
    4,423
    Users Country Flag
    Hi mate , there is Eurocarparts in Sydney and they will supply a full kit for a reasonable price, probably will find it is a LUK anyway. As for flywheel have the thing machined , you will find there is enough first time for the hydraulic mechanism to take up no worries. Not a Dual mass so like i say have it machined. By the way i know someone who machines dual massers if you are stuck
    CHeers
    Alba European
    Service, Diagnostics and repairs. Mobile Diag available on request
    Audi/VW/Porsche Factory trained tech 25+ yrs exp
    For people who value experience call 0423965341

  3. #3
    Join Date
    Nov 2007
    Location
    NSW
    Posts
    146
    Thread Starter
    Cool thanx heaps.
    The mechanic has informed me that he is not sure if he can find someone to machine the flywheel.. so maybe that contact of your will might come in handy...

  4. #4
    Join Date
    Aug 2007
    Location
    Dont poke and hope, scan, smoke and scope
    Posts
    4,423
    Users Country Flag
    Hi mate my post might have been a bit cryptic - your engine shouldnt have a dual mass flywheel mate so you will be able to get it machined at a local shop. I meant i know someone if anyone needs a dual mass machined. Have fun.
    Alba European
    Service, Diagnostics and repairs. Mobile Diag available on request
    Audi/VW/Porsche Factory trained tech 25+ yrs exp
    For people who value experience call 0423965341

  5. #5
    Join Date
    Nov 2007
    Location
    NSW
    Posts
    146
    Thread Starter
    Aha.. Now i get it..
    I know fair bit about Skylines, my weekender but not so much about my VW,the daily driver..
    Cheers eitherway..

  6. #6
    Join Date
    Nov 2007
    Location
    NSW
    Posts
    146
    Thread Starter
    Anyone heard of the RIVETS on the DIFF snapping off on a 1.6L box?Been told its a common prblem for this box and supposedly they make a BOLT KIT to fix propblem.
    A couple of times i reverse, the car would get JAMMED and not move. then had to drive forward to UN-JAM and after a loud bang, the car would move again. When changing the clutch, we found alot of small chunks of gearbox guts??

  7. #7
    Join Date
    Aug 2007
    Location
    Dont poke and hope, scan, smoke and scope
    Posts
    4,423
    Users Country Flag
    OMG mate get that box stripped as you have been very lucky the diff hasnt squeezed it through the casing. Yes yes yes very common and transporters too. I have heard of a bolt kit last one i done we just salvaged a diff from another but do some research but man get that thing sorted or you will be up for more than a diff!!!!!!!
    Alba European
    Service, Diagnostics and repairs. Mobile Diag available on request
    Audi/VW/Porsche Factory trained tech 25+ yrs exp
    For people who value experience call 0423965341

  8. #8
    Join Date
    Nov 2007
    Location
    NSW
    Posts
    146
    Thread Starter
    hey thanks Jimmy.
    Box getting stripped today!
    Im guessing you kow your SH#* so thanks again.

  9. #9
    Join Date
    Aug 2007
    Location
    Dont poke and hope, scan, smoke and scope
    Posts
    4,423
    Users Country Flag
    Good man and hey put a lotto ticket on, in my experience that would have spat through the casing.
    Keep us posted on how you go mate
    Jmac
    Alba European
    Service, Diagnostics and repairs. Mobile Diag available on request
    Audi/VW/Porsche Factory trained tech 25+ yrs exp
    For people who value experience call 0423965341

  10. #10
    Join Date
    Nov 2007
    Location
    NSW
    Posts
    146
    Thread Starter

    Gearbox bloke thinks its the boz and not so much the diff.
    $900 to rebuild the box and check the diff.
    Is that about right?
    Anyone with suggetions on who to call for a quote?

Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |