VCDS is used to check the temp of the fluid , not the level. The temp affects the level. procedure must be done properly or you will affect the driveabilty, which goes for any auto, too much or too little fluid causes shift faults. Trans is an 01M. pretty hard to know if you are getting a "good nick" unless you know and trust the seller and they have tested it otherwise its the luck of the draw really. Historically the 01m and 01P have been known for valve body issues as does the new 09G in the newer ones unfortunatley. If diagnosed early the valve bodies can be fixed by havjng them reamed and oversize solenoids fitted. The printed circuit foil has been know to form cracks too which can give shift dramas.
Jmac
Alba European
Service, Diagnostics and repairs. Mobile Diag available on request
Audi/VW/Porsche Factory trained tech 25+ yrs exp
For people who value experience call 0423965341
Bookmarks