Support VWWC

Results 1 to 10 of 536

Thread: Jlt-r32

Hybrid View

Mr. JLT Jlt-r32 25-03-2009, 08:38 AM
DubSteve Oh yes please you yanks with... 25-03-2009, 08:40 AM
Mr. JLT Here are some of the... 25-03-2009, 08:43 AM
Manaz What are the replacement... 25-03-2009, 09:25 AM
Mischa very nice... it seems the... 25-03-2009, 09:51 AM
balkanac and how much were they? I... 25-03-2009, 11:17 AM
qsilverza I have similar rotors on my... 25-03-2009, 11:31 AM
fuzion ive got redstuff sitting... 25-03-2009, 01:28 PM
Treza360 Strange that the rears had... 25-03-2009, 06:16 PM
Mr. JLT Replacement rotors 25-03-2009, 07:26 PM
flynhigh2007 whats with the polish flag?... 25-03-2009, 08:33 PM
Blitzen Its the bottom of a Yank... 25-03-2009, 09:06 PM
Mr. JLT So i got a little more work... 26-03-2009, 01:42 AM
KI11Z hmm, new wheels too?? 26-03-2009, 07:08 AM
Mr. JLT upgrades 26-03-2009, 08:05 AM
fuzion nice one.. looks good, you... 26-03-2009, 11:31 AM
JVLR32 very nice JLT:biggrin: 26-03-2009, 12:43 PM
Manaz Are the calilpers the... 26-03-2009, 01:39 PM
Mischa nice did you put the rear... 26-03-2009, 01:57 PM
fuzion Did you grab the rims from... 26-03-2009, 02:07 PM
KI11Z mmmmm, porrrrrrssscccchhhhhe... 26-03-2009, 02:32 PM
Mrk_Mickey I've never really liked those... 26-03-2009, 03:40 PM
fuzion http://img161.imageshack.us/im... 26-03-2009, 03:52 PM
Mrk_Mickey Mmmm.....nah don't like 'em... 26-03-2009, 03:57 PM
Treza360 You're right there is way too... 26-03-2009, 06:23 PM
Mischa that car has the S and P but... 26-03-2009, 11:10 PM
Mrk_Mickey It looks stock... 26-03-2009, 11:13 PM
Mr. JLT The rear calipers are stock i... 27-03-2009, 04:30 PM
Mr. JLT Well im off to the garage for... 27-03-2009, 04:42 PM
Lorenz The porshe wheels are going... 27-03-2009, 07:04 PM
Mr. JLT I finished up the drivers... 27-03-2009, 10:27 PM
Mr. JLT I finished up the coilovers... 28-03-2009, 03:28 AM
fuzion love it! nice height looks... 28-03-2009, 01:01 PM
Mischa looks good, are they... 28-03-2009, 01:04 PM
Mr. JLT All up for the rotors and... 28-03-2009, 02:06 PM
Mr. JLT Here is a side/front view of... 28-03-2009, 03:07 PM
Treza360 Looking good mate. She looks... 28-03-2009, 04:06 PM
Mischa look like 40's to me. could... 28-03-2009, 04:19 PM
Mr. JLT Thanks for all the props... 28-03-2009, 05:52 PM
fuzion i think your as low as me or... 28-03-2009, 05:58 PM
Golf Houso You forgot about Parramatta... 28-03-2009, 08:38 PM
Treza360 Well I can fit a finger or... 28-03-2009, 08:48 PM
Mischa ah its not that bad ya pansy... 28-03-2009, 09:58 PM
fuzion do we need a new thread? ... 29-03-2009, 07:00 AM
Mr. JLT i think its about 50-55 mm up... 29-03-2009, 06:18 PM
Mr. JLT So i took off the front... 03-04-2009, 09:27 AM
Mr. JLT http://i58.photobucket.com/alb... 04-04-2009, 04:52 PM
Mrk_Mickey That colour is AWESOME!! :D 04-04-2009, 05:09 PM
Treza360 So shiny and new. Looking... 04-04-2009, 05:30 PM
thestu looks sweet as mate :D 04-04-2009, 05:33 PM
Mr. JLT http://i58.photobucket.com/alb... 04-04-2009, 06:56 PM
Mischa holy **** those rears are... 04-04-2009, 07:39 PM
jasn78 *passes mischa some tissues... 04-04-2009, 08:08 PM
Mr. JLT thanks guys, i want to drive... 04-04-2009, 10:43 PM
Mr. JLT Well i removed the porsche... 07-04-2009, 03:05 PM
Mrk_Mickey As if paint the wheels... 07-04-2009, 04:20 PM
Mr. JLT So after the bead blasting... 20-04-2009, 11:55 PM
Preen59 Very nice. :) 20-04-2009, 11:57 PM
dubbed Sweeeeeeeet. 21-04-2009, 09:04 AM
Mr. JLT a few more of the wheels- I... 21-04-2009, 09:48 PM
Mr. JLT So i redid the center caps a... 30-04-2009, 11:30 PM
KI11Z effin sick dude, though what... 01-05-2009, 09:08 AM
Mr. JLT The rims are black magic... 01-05-2009, 09:27 AM
WABIT nice choice on the color... 01-05-2009, 10:18 AM
Lorenz Wheels and seats look... 01-05-2009, 10:23 AM
dubbed Seats look hardcore sexy! 02-05-2009, 06:33 PM
Mr. JLT seats 02-05-2009, 06:45 PM
Yevvy can't wait to see them in/on... 03-05-2009, 01:18 AM
99gti This car is a show stopper!... 10-05-2009, 09:46 PM
Mrk_Mickey Holy crap, those wheels are... 10-05-2009, 10:18 PM
Mr. JLT So I think the suspension is... 10-05-2009, 11:10 PM
WABIT looking good dude, interested... 11-05-2009, 12:11 AM
KI11Z Where's the porsche... 11-05-2009, 04:10 AM
fuzion love the jetta votex front..... 11-05-2009, 09:16 AM
gareth_oau JLT, the car looks superb,... 11-05-2009, 10:30 AM
Fizz Awesome car!! Agreed where... 11-05-2009, 10:43 AM
Mr. JLT I'm waiting to get my front... 11-05-2009, 12:55 PM
tomtom_r32 This car is absolutely... 14-05-2009, 09:58 AM
Coxy09 Jay man, car is looking siik!... 16-05-2009, 07:50 PM
Mr. JLT VF Mounts 16-06-2009, 09:02 PM
quozl You'll like these they really... 16-06-2009, 10:46 PM
Mr. JLT wheels & lip 20-06-2009, 10:18 AM
Fizz that looks sik! love the... 20-06-2009, 12:17 PM
gareth_oau JLT, the cops in WA would put... 20-06-2009, 12:19 PM
MIS.18T yep thats why i cut my rear... 20-06-2009, 12:21 PM
Jarred lucky he's not in WA then! ... 20-06-2009, 01:38 PM
Blitzen He is lucky in his case...He... 20-06-2009, 01:41 PM
WABIT fat azz dude! looks amazing!... 20-06-2009, 01:43 PM
dylan8 Car looks amazing! 20-06-2009, 03:57 PM
quozl Looks great:cool46: 20-06-2009, 04:08 PM
JVLR32 almost as good as... 20-06-2009, 04:10 PM
Mrk_Mickey Nice one, although I think I... 20-06-2009, 09:46 PM
astro that has to be the best... 21-06-2009, 01:23 PM
KI11Z yep, definately killin it... 22-06-2009, 10:15 AM
VR6child So what happens if you get... 26-06-2009, 10:36 AM
Mr. JLT Yea what I usually do is wave... 26-06-2009, 10:51 AM
Jarred hahahahah lmao. I've got... 26-06-2009, 11:07 AM
Mr. JLT I might have a few Us plates... 26-06-2009, 11:29 AM
GoLfMan might have to dig around my... 26-06-2009, 04:49 PM
Mr. JLT Hids 27-06-2009, 05:45 PM
velly_16v_cab ahh...the good old jedi mind... 26-06-2009, 11:19 AM
fuzion nice jay! looks farken... 29-06-2009, 05:21 PM
Yevvy ...turbo? ;) car looks... 30-06-2009, 12:19 AM
Mr. JLT Getting ready to start the... 10-09-2009, 01:33 PM
GoLfMan wooooott :D 10-09-2009, 06:25 PM
Mrk_Mickey I want your car. Can I have... 10-09-2009, 06:36 PM
Mr. JLT i may be able to whore her... 10-09-2009, 07:02 PM
Silver dub mabye you could make the 2... 11-09-2009, 05:58 PM
Mr. JLT Currently im rocken the... 11-09-2009, 07:20 PM
Mr. JLT So relocated the battery to... 17-09-2009, 11:08 PM
fuzion more like "are you done yet..... 17-09-2009, 11:15 PM
sir_camel I agree with both of those... 18-09-2009, 12:01 AM
Mr. JLT So I have a been a bit busy... 04-10-2009, 07:37 PM
fuzion christ! some serious effort... 04-10-2009, 08:01 PM
Mr. JLT I ordered some new head... 04-10-2009, 08:11 PM
schoona Amateur question. AWIC = ???... 04-10-2009, 08:12 PM
Mr. JLT Air to water intercooler kit,... 04-10-2009, 08:20 PM
schoona Ah I see I see. Haven't seen... 04-10-2009, 08:25 PM
Mr. JLT Its all about temps and... 04-10-2009, 08:38 PM
Mr. JLT The car travels a good bit-... 04-10-2009, 08:40 PM
dylan8 I don't even know what to... 04-10-2009, 09:22 PM
schoona I saw it. Absolutely... 04-10-2009, 09:25 PM
Mr. JLT I have a few other things to... 04-10-2009, 10:02 PM
GoLfMan thats freakin awesome dude :)... 04-10-2009, 10:12 PM
Mr. JLT Thanks M8- whats the dates... 04-10-2009, 10:41 PM
fuzion nov 15th! dovw 9:1? christ... 04-10-2009, 11:06 PM
Mr. JLT I could have gone 8:1 or... 04-10-2009, 11:17 PM
JVLR32 ok all sounds ok! wat hps... 05-10-2009, 09:20 AM
Mr. JLT I'm going to start with 10psi... 05-10-2009, 05:31 PM
JVLR32 so you have some serious head... 05-10-2009, 05:41 PM
Mr. JLT Nope-head work and cams are... 05-10-2009, 06:06 PM
JVLR32 Interesting....you would... 05-10-2009, 07:56 PM
Mr. JLT wheeew got some parts in.. I... 07-11-2009, 12:48 AM
fuzion all ive done is gearbox on... 07-11-2009, 08:15 AM
Mr. JLT Im trying to chase down some... 07-11-2009, 08:35 AM
tomtom_r32 Absolutely amazing mate. ... 07-11-2009, 08:47 AM
Mr. JLT I was able to score the banjo... 08-11-2009, 11:02 AM
Jarred I like where this is headed!... 08-11-2009, 11:47 AM
Mr. JLT This is a custom kit I built... 09-11-2009, 12:44 AM
Mr. JLT So i rerouted the bank 1 or... 10-11-2009, 08:43 AM
Mr. JLT I redid all the wiring on the... 11-11-2009, 11:41 AM
GoLfMan that sounds AWESOME dude :D ... 11-11-2009, 11:45 AM
Mr. JLT I'll get more pics when I get... 11-11-2009, 12:05 PM
GoLfMan love ya work :D 11-11-2009, 02:12 PM
thestu NICE!!!!! love it!! 11-11-2009, 02:55 PM
Mr. JLT Fitting the cooler,over flow... 12-11-2009, 08:30 PM
jasn78 some1 get me some tissues... 12-11-2009, 10:13 PM
Mr. JLT I still need to wire up the... 13-11-2009, 08:06 AM
Yevvy :shocker: awesome! 13-11-2009, 10:55 AM
Domi_Nick Love the build, hate the... 17-11-2009, 09:53 PM
william [QUOTE=Domi_Nick;418564]Love... 17-11-2009, 10:10 PM
Blitzen How can you say this isn't... 17-11-2009, 10:18 PM
tomtom_r32 Build me a turbo!! Again... 18-11-2009, 06:17 AM
Mr. JLT Thanks guys remember everyone... 18-11-2009, 07:56 AM
DUB 12V nice work looks mad, what hp... 18-11-2009, 08:58 AM
DUB 12V when you say he BUILT it? do... 18-11-2009, 09:00 AM
GoLfMan I believe he fabbed alot of... 18-11-2009, 09:10 AM
Blitzen I know the answer, but you... 18-11-2009, 11:54 PM
Mr. JLT Sorry mate I can't make... 19-11-2009, 07:09 AM
RolfGolf This is a great build thread... 19-11-2009, 09:00 PM
VWindahouse Enough said... 19-11-2009, 09:10 PM
Preen59 This really is the problem... 19-11-2009, 09:47 PM
Mrk_Mickey Completely agree. I tend to... 19-11-2009, 10:20 PM
Domi_Nick :banana: 18-11-2009, 08:53 PM
dylan8 Love it! Should bring it... 18-11-2009, 09:07 PM
Preen59 Nice build mate.. Love it. :) 05-10-2009, 05:41 PM
Mr. JLT Thanks mate I cant wait to... 05-10-2009, 06:09 PM
kaneda Maybe less drinking beers and... 05-10-2009, 07:05 PM
GoLfMan does that mean your comin... 05-10-2009, 07:08 AM
Water Boy Top notch work mate! Get some... 20-11-2009, 01:25 PM
Mr. JLT I installed one of the front... 25-11-2009, 10:37 PM
Blitzen Looks the goods Jay...Can't... 25-11-2009, 10:55 PM
AusScare 6pot caliper? That thing is... 25-11-2009, 11:00 PM
Mr. JLT Im not sure yet? 26-11-2009, 12:10 AM
Kiel_GTI im sure you could fit MRJLT... 26-11-2009, 03:22 AM
dubbed That caliper is huge. What's... 26-11-2009, 08:42 AM
Mr. JLT The front and rear calipers... 27-11-2009, 12:22 AM
dubbed I thought they looked like... 27-11-2009, 09:11 AM
Mr. JLT Shes all cleaned up and... 27-11-2009, 02:35 PM
Preen59 Angry. Looks good dude. :) ... 27-11-2009, 03:41 PM
goodfella or are you happy to be rollin... 27-11-2009, 05:08 PM
Blitzen Nah, its a Radiator for his... 27-11-2009, 05:18 PM
Preen59 Ahh yes. It all makes sense... 27-11-2009, 05:33 PM
Mr. JLT I still need to tidy some... 28-11-2009, 01:31 PM
Treza360 That engine bay is just pure... 28-11-2009, 02:56 PM
Preen59 The WtA intercooler setup is... 28-11-2009, 06:30 PM
GoLfMan me love you long time :eek:... 29-11-2009, 08:45 AM
ben what an amazing looking car.... 30-11-2009, 04:42 PM
fuzion That engine bay is flawless... 02-12-2009, 03:03 PM
schoona Sweet progress!!! Love it. ... 02-12-2009, 03:47 PM
JVLR32 looks the goods J.... Just... 02-12-2009, 04:08 PM
Mr. JLT Thanks guys.. The exhaust... 02-12-2009, 09:43 PM
Mr. JLT So in the mean time I started... 02-12-2009, 09:53 PM
Oneofthegreats Awesome work as usual Jay. ... 02-12-2009, 10:10 PM
vwthunder Wow HRE's :eek: One of... 02-12-2009, 10:23 PM
fuzion i looked at the wheel and... 03-12-2009, 07:04 AM
GoLfMan nice J I recon got a matte... 03-12-2009, 07:05 AM
DubSteve Damm you yankees can do some... 03-12-2009, 07:09 AM
Mr. JLT Thanks M8's I cant wait to... 03-12-2009, 07:50 AM
fuzion i want to strip the dpe's but... 03-12-2009, 08:14 AM
dubbed Black centres, polished lips,... 03-12-2009, 09:00 AM
Blitzen Polished rims, crackle... 03-12-2009, 05:09 PM
geoff_gti Yeah I was thinking orange... 04-12-2009, 06:16 PM
kaneda Id say should be all systems... 04-12-2009, 06:29 PM
Mr. JLT Sweet pic thanks Steve 04-12-2009, 07:35 PM
kaneda http://img704.imageshack.us/im... 04-12-2009, 07:45 PM
Preen59 That's just hot. All things... 04-12-2009, 09:19 PM
Mr. JLT I have been working on making... 17-12-2009, 05:00 PM
Preen59 Great work dude. Just how i'd... 17-12-2009, 05:10 PM
schoona Nice little miller :) Are... 17-12-2009, 05:15 PM
Preen59 Looks like a little CNC mill... 17-12-2009, 05:27 PM
schoona Now tell me how the heck you... 17-12-2009, 05:35 PM
Preen59 The job has no visible... 17-12-2009, 05:43 PM
schoona Ta, I'm sure we can have some... 17-12-2009, 05:57 PM
Mr. JLT I was running the Y axis and... 17-12-2009, 06:15 PM
Preen59 Interesting. I did notice... 17-12-2009, 06:52 PM
GoLfMan either that or chucked a... 18-12-2009, 07:27 AM
Mr. JLT Almost done with 1 of the... 20-12-2009, 03:35 PM
Preen59 Looks good Jay! What grade is... 20-12-2009, 06:36 PM
Mr. JLT I'll have to look on the... 20-12-2009, 08:41 PM
Preen59 If that's the case it should... 20-12-2009, 09:15 PM
Mr. JLT So I have been busy like a... 16-01-2010, 02:52 PM
Preen59 Looks good mate. Keep it up!... 16-01-2010, 03:46 PM
GoLfMan wohoo for updates!!! :D 18-01-2010, 07:21 AM
Mr. JLT So I bead blasted all the... 24-01-2010, 04:26 AM
Mr. JLT installed new parts, made... 24-01-2010, 04:30 AM
kaneda http://img651.imageshack.us/im... 24-01-2010, 10:50 AM
Oneofthegreats Awesome Jay! Just Awesome!... 24-01-2010, 11:34 AM
kaneda http://img163.imageshack.us/im... 24-01-2010, 11:44 AM
Mr. JLT I built my own setup-but i... 24-01-2010, 12:16 PM
Oneofthegreats Nice work. Hopefully it... 24-01-2010, 12:29 PM
Mr. JLT I still need to do a few... 24-01-2010, 12:37 PM
Bboy_Sparx Looks neat Jay 25-01-2010, 10:54 PM
Mr. JLT Cheers M8... 25-01-2010, 10:57 PM
Jarred Impeccibly clean. Well done... 25-01-2010, 11:03 PM
Mr. JLT CHeers mate there are few... 25-01-2010, 11:52 PM
Mr. JLT Yes both the Y and X are ran... 17-12-2009, 06:08 PM
fuzion nice one Jay, looks hot man... 26-11-2009, 08:52 AM
D3bb4 nice. Those RDA rotors... 26-11-2009, 09:44 AM
Mr. JLT No the rotors are custom from... 27-11-2009, 12:17 AM
Oneofthegreats Jeez Jay. You have been busy!... 30-11-2009, 05:04 PM
Treza360 Wicked rims mate. I reckon in... 27-06-2009, 05:38 PM
Mr. JLT Thanks mate.. :) 27-06-2009, 05:46 PM
RhysQ haha, sounds like here in... 28-03-2009, 08:44 PM
vwthunder I must have missed something... 28-03-2009, 08:53 PM
Manaz Oooh, Bora headlights? 28-03-2009, 09:00 PM
Treza360 US Serviceman stationed in... 28-03-2009, 09:05 PM
Manaz Are you happy with the... 28-06-2009, 01:35 PM
Mr. JLT Yeap I am happy with them and... 28-06-2009, 08:54 PM
Mr. JLT Tst 28-06-2009, 11:45 PM
GoLfMan phat :D.......... 29-06-2009, 08:16 AM
velly_16v_cab have you been looking in the... 29-06-2009, 08:29 AM
GoLfMan yup, my rear vision... 29-06-2009, 12:19 PM
AusScare How do you open the boot? 19-11-2009, 10:52 PM
william i would say solenoid boot... 19-11-2009, 11:15 PM
Mr. JLT I used the same solenoid that... 20-11-2009, 01:18 PM
Big_M In these pics is he running... 11-12-2010, 06:16 AM
Mr. JLT Matt Eric was running a... 11-12-2010, 09:02 AM
Big_M Mate, that would be great if... 11-12-2010, 10:09 AM
Mr. JLT Nah sorry mate no thread.... 11-12-2010, 11:01 AM
Mr. JLT SO I got around to installing... 06-01-2011, 02:14 PM
Big_M Damn, I thought it was safe... 06-01-2011, 03:56 PM
Jarred SO tidy! excellent 06-01-2011, 04:36 PM
Mr. JLT Post office trip was good I... 06-01-2011, 05:01 PM
Mr. JLT Operation Cool seat was... 07-01-2011, 11:41 AM
GoLfMan gotta keep the jubblies cool... 07-01-2011, 11:55 AM
dylan8 Love those Lobster claws.... 07-01-2011, 12:09 PM
Water Boy hAHHAHAHHA! 27-01-2011, 01:28 PM
Manaz Do you happen to have a part... 07-01-2011, 01:33 PM
Mr. JLT Part Number: 8L9 805 629 A ... 09-01-2011, 01:40 PM
Mr. JLT Flashed the Ecu with the Ecs... 10-01-2011, 08:10 PM
Manaz Cheers. Does it follow the... 26-01-2011, 08:11 AM
Mr. JLT I posted a pic 1 page back.... 26-01-2011, 01:04 PM
Manaz Thanks. Appears I'm an idiot... 26-01-2011, 09:37 PM
Mr. JLT It came off a RhD audi S3 26-01-2011, 09:49 PM
Manaz Even better. :) 27-01-2011, 08:05 PM
Treza360 Jay I know you're probably... 02-02-2011, 12:09 PM
Preen59 x2, guys. Best of luck with... 02-02-2011, 12:13 PM
Mr. JLT Cheers Guys yea I think... 02-02-2011, 12:31 PM
Silver dub Let's all hope this bastard... 02-02-2011, 12:48 PM
Big_M Mate gonna be one rocky ride.... 02-02-2011, 01:05 PM
fuzion x3.. good luck with it all... 02-02-2011, 05:35 PM
Mr. JLT All is well gents, waiting to... 03-02-2011, 10:40 AM
ausgolfer Glad to hear you're alright... 03-02-2011, 02:09 PM
Mr. JLT The ..::R and my wheel... 03-02-2011, 03:29 PM
Silver dub Glad to hear jay, now that we... 03-02-2011, 03:41 PM
Big_M Cool. Shame i don't need to... 03-02-2011, 04:10 PM
Mr. JLT Got my custom made forged... 25-02-2011, 06:47 PM
Mr. JLT And I have scored a set of... 25-02-2011, 06:56 PM
GoLfMan HOLY MOLY! paint them black... 25-02-2011, 07:11 PM
Tim leave them as is. The factory... 25-02-2011, 07:14 PM
Mr. JLT I do like black wheels but... 25-02-2011, 07:22 PM
goodfella Interesting hybrid design of... 25-02-2011, 07:23 PM
goodfella ye olde faithful and timeless... 25-02-2011, 07:22 PM
Mr. JLT Yea with the ET it clears... 25-02-2011, 07:36 PM
Preen59 I'd leave them. They look... 25-02-2011, 07:42 PM
Lorenz Dope wheels, nice find and I... 25-02-2011, 08:59 PM
Big_M Beautiful man. Now you don't... 25-02-2011, 10:03 PM
Mr. JLT Slate Grey Metallic ... 25-02-2011, 10:10 PM
Big_M Don't tell me that man !! ... 25-02-2011, 10:51 PM
YellowDieselGolf http://images.elfwood.com/art/... 03-03-2011, 06:46 AM
Speed Those wheels are awesome! ... 25-02-2011, 09:13 PM
schoona Holy foooook that is an... 25-02-2011, 09:36 PM
Jarred crazy specs! love it. I'd... 26-02-2011, 05:10 PM
thestu Good job! I'll be doing this... 30-07-2010, 07:24 PM
Mr. JLT wheeeew work out is done now... 31-07-2010, 09:22 AM
Big_M More great work. Always a... 31-07-2010, 09:31 AM
alex g blank canvas nice one... 31-07-2010, 10:25 AM
noone Guys, there is a 42DD group... 18-09-2010, 11:49 AM
Mr. JLT http://www.vwwatercooled.com.a... 18-09-2010, 05:14 PM
Mr. JLT http://www.vwwatercooled.com.a... 18-09-2010, 05:26 PM
drewr Absolutely... 19-09-2010, 11:04 AM
Mr. JLT http://www.vwwatercooled.com.a... 18-09-2010, 05:26 PM
GoLfMan sleeeeep.....RRRRRR 19-09-2010, 09:19 AM
thestu Fantastic! Done a great job... 26-09-2010, 09:11 AM
BI65ND Wow that last picture is... 26-09-2010, 10:30 AM
RolfGolf That garage is big enough to... 26-09-2010, 11:10 AM
Preen59 Looking good, mate! :) 26-09-2010, 06:40 PM
the_kyle Audi comes standard with that... 11-01-2011, 05:36 PM
schoona I don't know your car, but I... 11-01-2011, 05:43 PM
goodfella I have... and they are both... 11-01-2011, 06:22 PM
kaneda Is that to make up for the... 11-01-2011, 08:34 PM
the_kyle It's to compensate for the... 13-01-2011, 02:26 PM
Mr. JLT Going to install some new HPA... 25-01-2011, 09:07 PM
Big_M Nice, hows it back in the... 26-01-2011, 11:50 AM
Mr. JLT Big M I'm still in Townsvegas... 26-01-2011, 01:05 PM
Treza360 Good to see you're still... 26-01-2011, 02:51 PM
Big_M Extended tour huh or just... 26-01-2011, 03:14 PM
alex g Nice one brother , bullet... 26-02-2011, 06:59 PM
Mr. JLT With the built bottom end I... 26-02-2011, 08:56 PM
alex g Woo hoo that must be so much... 27-02-2011, 06:23 AM
schoona You are a machine Jay. So... 27-02-2011, 09:02 AM
Mr. JLT Thanks mate. Would any one... 27-02-2011, 05:37 PM
Big_M Sorry mate can't help with... 27-02-2011, 05:44 PM
alex g Nice jay , hydraulic... 02-03-2011, 06:02 PM
McDub yeah what on earth is that... 02-03-2011, 07:56 PM
Mr. JLT what is your question. 02-03-2011, 08:15 PM
McDub the brembo e brake, or... 30-04-2011, 03:53 PM
Mr. JLT No hydraulic hand brake. The... 02-03-2011, 08:12 PM
alex g Was thinking that , would be... 03-03-2011, 05:51 AM
alex g http://www.vwwatercooled.com.a... 03-03-2011, 05:56 AM
Big_M Looking good man. A hyd... 03-03-2011, 06:16 AM
Mr. JLT Yo I'm digging that set up... 03-03-2011, 05:05 PM
alex g No bro ,it's just plumbed... 03-03-2011, 05:30 PM
Mr. JLT Just wanted to say thanks to... 14-03-2011, 03:51 PM
Mr. JLT I got one set of rear BBK... 30-04-2011, 02:45 PM
Mr. JLT Thanks SG for the photo's 30-04-2011, 02:48 PM
Jarred So euro! love it! 30-04-2011, 03:40 PM
alex g Looking the biz brethren. ... 30-04-2011, 07:36 PM
drewr Hollyyyyy f*cken moleey!... 30-04-2011, 07:42 PM
RolfGolf Had never noticed the sunroof... 30-04-2011, 10:57 PM
audi-tone Whatcha going to do with your... 02-05-2011, 04:56 PM
Mr. JLT Its already sold mate. 02-05-2011, 05:04 PM
audi-tone Whatcha going to do with your... 02-05-2011, 05:06 PM
audi-tone Stupid iPhone double post. ... 02-05-2011, 05:07 PM
Mr. JLT All good mate I'm sure you... 02-05-2011, 06:51 PM
dylan8 think i know the one... Car... 02-05-2011, 07:56 PM
Mr. JLT Cheers Bro, I won't be able... 02-05-2011, 08:13 PM
Mr. JLT Sup gents. All is well just... 14-06-2011, 11:52 PM
Water Boy Jay you need to start a Mk1... 15-06-2011, 12:27 AM
Mr. JLT So the mk3 got finished and I... 05-12-2011, 03:44 AM
Silver dub So do we even get to see pics... 05-12-2011, 06:30 AM
thestu Jayyyyyy we miss you! :( ... 05-12-2011, 09:30 AM
drewr Jesus- vanish for months,... 05-12-2011, 11:44 AM
Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Oct 2008
    Location
    Townsvegas QLD
    Posts
    466
    Users Country Flag Thread Starter
    Quote Originally Posted by golfworx View Post
    Awesome Jay!

    Just Awesome! Love your work

    Quick question in regards to the tune.

    The remapped ecu/chip you got sent to you.

    Do they set up tune to your injector & turbo size or have you built this entire turbo setup eg. turbo, injector's, exhaust sizing etc. to one of their known injector sized tunes that works spot on in the States? eg. the 550, 630cc or 800+cc file etc.

    Oh yeah. More pics as always too!
    I built my own setup-but i talked to Chris and Jeff at C2 and explained what turbo hardware I had and what had been done and I went with the stage 2 V2.5 550 program and Jeff tailored it so my setup.
    SLAM.POKE.TUCK.DROP.DOPE!

  2. #2
    Quote Originally Posted by Mr. JLT View Post
    I built my own setup-but i talked to Chris and Jeff at C2 and explained what turbo hardware I had and what had been done and I went with the stage 2 V2.5 550 program and Jeff tailored it so my setup.
    Nice work.

    Hopefully it all works spot on in regards to Aussie fuel & considering the climate conditions up there.

    I'm sure they setup the tune in a safe way eg. timing, fueling etc. Better to be safe than 100% on the ragard edge, ping & BANG!

    Well maybe its just mine that pings hard! But I like it to come on hard, so I'm really aggressive with the timing & plus its only a $50 engine too! Fire away! haha

    I reckon once I build a big doller engine, I'll be a hell of alot more conservative & safe!

    Look forward to seeing how it perform's!

    Any chance of a quick run at Townsville raceway?

  3. #3
    Join Date
    Oct 2008
    Location
    Townsvegas QLD
    Posts
    466
    Users Country Flag Thread Starter
    I still need to do a few things- I need to work on the center grill that goes in my front bar because it contacts the one side of my cooler. So i may counter sink the cooler just a bit, I need to set the boost-My MBC doesnt seem to be working correctly so ill read up on it, I need to install a 044 inline pump, and whore myself out for a clutch and water/meth set up
    SLAM.POKE.TUCK.DROP.DOPE!

  4. #4
    Join Date
    Sep 2006
    Location
    Canberra, ACT
    Posts
    348
    Users Country Flag
    Looks neat Jay

  5. #5
    Join Date
    Oct 2008
    Location
    Townsvegas QLD
    Posts
    466
    Users Country Flag Thread Starter
    Cheers M8
    SLAM.POKE.TUCK.DROP.DOPE!

  6. #6
    Join Date
    Jun 2007
    Location
    Eastern Suburbs Melbourne
    Posts
    9,006
    Impeccibly clean. Well done Jay.


    i like volkswagens
    My blog: http://garagefiftythree.blogspot.com.au/

  7. #7
    Join Date
    Oct 2008
    Location
    Townsvegas QLD
    Posts
    466
    Users Country Flag Thread Starter
    CHeers mate there are few things I want to make better.
    SLAM.POKE.TUCK.DROP.DOPE!

  8. #8
    Join Date
    Jun 2006
    Location
    Orange NSW
    Posts
    5,745
    Engine bay looks very neat, Jay. I love the way everything sits. Great work mate.

    APR Tuned | KW Suspension | INA Engineering | Mocal Oil Control |
    Website: http://www.tprengineering.com
    Email: chris@tprengineering.com

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |