peel off the fabric


to get to the steel rods that pull the fabric together,its a bit of a pain in the ass but not hard




and thats that...the bare cushion


heres the element for the base




just place it on the foam and fold it into the slots


peel off the sticky ****,theres some on the bolsters to





i just cut a hole in the foam to feed the loom through

and thats bascially it for the base,put the fabric back on in reverse order

back together again and put the seat back on to the base and part of the loom into its new home(green connector)




on to the back...remove the headrest


start off at the bottom and start stripping the fabric




2 of these clips to be opened