Support VWWC

Page 1 of 3 123 LastLast
Results 1 to 10 of 24

Thread: Irish vw Bora 150pd sport............this is going to be quiet a pic heavy one to!

  1. #1
    Join Date
    Aug 2012
    Location
    ireland
    Posts
    48
    Users Country Flag

    Irish vw Bora 150pd sport............this is going to be quiet a pic heavy one to!

    i have this car about 4 years now and after doing a good few mods here and there..
    2002 vw bora 150 pd
    i spotted it on pistonheads,emailed the bloke for about a month,got a one way flight to London from Dublin and a one way trip on the ferry from Hollyhead to Roslare,hoping that the car was as good as it was described...luckiny it was,then drove 4.5 hours from London to Hollyhead,got the boat and another 2.5 hour trip home!


    spec was factory fitted zenons,sat nav,headlight washers,climatronic,sport interior,6 speed ,auto wipers,factory alarm,cruise control and auto dimming mirror.and of course the ARL150bhp diesel pd lump.

    first thing was H and R lowering springs..
    then fitted red l.e.ds into the door triggers.
































  2. #2
    Join Date
    Dec 2007
    Location
    GLENHUNTLEY,VICTORIA
    Posts
    1,938
    Awesome looking Bora

  3. #3
    Join Date
    Aug 2012
    Location
    ireland
    Posts
    48
    Users Country Flag Thread Starter
    then i fitted a set of genuine spots in the lower bumper grills





    bumper off, and got dround taking off the headlamp washers off to.




    air box and all bits removed for the wiring as well as puting in the wire for the switch...and while i was there decided to stick in the boost gauge(and b4 any one says anything,i know theres no vac in a deisel,its the only gauge i could get thats identical to the coulur of the facia)







    just a quick trial fit to make sure there working b4 everything is put back together


    and all done!





    ill stick up a pic later with the gauge.

    the pod wouldnt be exellent quality but it does the job





    where i connected the boost pipe to.



    full miltec exhaust including cat delete






    just some more pics from the last few days,while i was at it i said i might as well get the down pipe to


    this is what i was left with...


    so heres what it was like

  4. #4
    Join Date
    Aug 2012
    Location
    ireland
    Posts
    48
    Users Country Flag Thread Starter


    bits removed and rebar fitted back again





    and new one getting there











    new 4motion valance fitted also


    job done





    i fitted a tow bar for about 3 months to drag my bike around but sold that and sold the tow bar also

  5. #5
    Join Date
    Oct 2007
    Location
    Bairnsdale & Ferntree Gully, Victoria
    Posts
    7,491
    Bora, black, tdi, 6spd, OEM options.
    Man I'm so jealous. Wish we got them in aus
    Have any further plans?

  6. #6
    Join Date
    Mar 2009
    Location
    Sydney boy
    Posts
    312
    Cool car mate,
    I like the work youv done too.
    Need to bring it closer to earth.

  7. #7
    Join Date
    Aug 2012
    Location
    ireland
    Posts
    48
    Users Country Flag Thread Starter
    cheers for the comments lads,theres loads in the pipeline still!!

    also fitted stubbymirrors to .from a seat arosa/vw lupo


    during


    and after

    the differnce in the size

    all electrically adjusted and heated.


    also decidet to get rid of these




















    eventually got time to put in the w8 light
    have to say its a well worth mod to!



  8. #8
    Join Date
    Aug 2012
    Location
    ireland
    Posts
    48
    Users Country Flag Thread Starter
    brand new bbs rc's














    got the front 312mm brakes from a audi TT,rears to be put on soon


    the standard ones look lost!


    also got more black badges,front and rear,after the front was nicked



  9. #9
    Join Date
    Aug 2012
    Location
    ireland
    Posts
    48
    Users Country Flag Thread Starter







    i had stone guards to put on instead of bending back the original ones but were the wrong ones







    i had to make up some 6mm spacers for the carriers as the brakes were from a TT




    before and after



    never rains but it pours
    this decided to **** its self the other night!
    new pulley



  10. #10
    Join Date
    Aug 2012
    Location
    ireland
    Posts
    48
    Users Country Flag Thread Starter

    then i fitted a full vw genuine heated seat kit...
    sorry bout all the pics but theres loads!







    coilovers to be fitted soon to,just havnt got the time to fit em yet.

    out with the seats first,2 torx either side of the runners and 2 13mm nuts.....and dont forget to disconnect the the airbag loom and just slide the seat backwards!








    get a suitable kitcken counter top and start pulling the thing apart


    start by removing all the handles and knobs

    the height adjuster just has 2 torx,the other 2 knobs just pull off

    the bottom of the seat,the plastic trim has 2 screws one here ..

    and one behind

    and a plastic piece also to hold in the side of the trim



    and you should have this

    next,take the loom for the air bag and take it off the clips the hold it to the base of the seat as its going to be split

    theres 4 of these that hold the back of the seat to the base

    remove them and youre left with this


    flip it up on its arse

    and just lift up the edge of the fabric,it comes up easy enough

    just lift up the cushion then

Page 1 of 3 123 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |