Support VWWC

Results 1 to 10 of 10

Thread: If it was your car, where would you mount this mic?

  1. #1
    Join Date
    Jun 2009
    Location
    Melbourne
    Posts
    25

    If it was your car, where would you mount this mic?

    Hey guys,

    Got an alpine 103bt head unit with built in bluetooth after a $250 fine for using a mobile while driving..

    I've managed to get everything else connected and planning to route the ipod cord to come out of one of the vacant plastic pieces next to the hazard light.
    Would slow drilling do the job alright? I just need the other end (blue/green plug in the pic) of the ipod cord to fit

    Anyway, the main issue is finding out where to place the mic, it's the bottom one in this picture: (with the holder next to it)


    The cable's 4m long so distance shouldn't be a problem

    I was thinking of putting it where this guy did:


    Anyone got any ideas? Preferably something that requires the least amount of work and trim removal.
    I was thinking somewhere in the dash but it doesn't seem to fit anywhere

    Any help/opinion would be great guys
    Last edited by jdimitri; 17-07-2010 at 09:28 PM.

  2. #2
    Join Date
    Jun 2005
    Location
    Boronia VIC
    Posts
    4,394
    Users Country Flag
    I put mine inside the interior light assembly.

    There's a little grill there that looks like it was made for it and it works well.

    Pete

    Last edited by Peter Jones; 17-07-2010 at 09:50 PM.
    79 MK1 Golf Wreck to Race / 79 MK1 Golf The Red Thread / 76 MK1 Golf Kamei Race Car
    7? MK1 Caddy
    79 B1 Passat Dasher Project
    12 Amarok

  3. #3
    Join Date
    Jun 2009
    Location
    Melbourne
    Posts
    25
    Thread Starter
    Oh wow, never even thought of that..

    Do you mind showing me a picture of how you mounted it?

  4. #4
    Join Date
    Jun 2005
    Location
    Boronia VIC
    Posts
    4,394
    Users Country Flag
    Behind that little grill there's a recess with a block of foam just jammed in the hole.

    I just put the mic in the hole and cut a couple of pieces off the foam block to wedge in there and hold it steady.

    I can take a picture of the back of another light that's already out of the car tomorrow.

    Pete
    79 MK1 Golf Wreck to Race / 79 MK1 Golf The Red Thread / 76 MK1 Golf Kamei Race Car
    7? MK1 Caddy
    79 B1 Passat Dasher Project
    12 Amarok

  5. #5
    Join Date
    Apr 2010
    Location
    Sydney,NSW
    Posts
    344
    Users Country Flag
    That's a great idea Pete! Mine is mounted on the A-pillar, works well but looks crap. Might have to look into moving it, not sure I have that grill there though as my light cluster is different (no sunroof).

    Adam
    2012 Subaru WRX STi Spec-R in "Lightening Red" because red cars are the fastest!!
    Previously -
    2007 EOS 2.0 TFSI Indium Grey ~ Photos Here
    2002 Bora V5

  6. #6
    Join Date
    Jul 2007
    Location
    Brissy
    Posts
    2,208
    Users Country Flag
    The pillar or the grill in the light look good. I think the pillar maybe easier for running the wiring though.

    As for drilling the plastic: Take the blank out and put in a vice. You can drill it easy but I have had good results using a conical grinding bit.
    I use a set like this...
    MK4 GTI - Sold
    MK5 Jetta Turbo - Sold
    MK5 Jetta 2.Slow - Until it dies.

  7. #7
    Join Date
    May 2005
    Location
    sydney
    Posts
    1,669
    Users Country Flag
    mounted mine on the sun flap thing near the sun roof/interior light control

    Quote Originally Posted by Preen59 View Post
    I would have gotten wood from the picture message you sent me.. But I was sniffing Nitro, so i already had it. Hahaha.

  8. #8
    Join Date
    Aug 2007
    Location
    Perth, Australia
    Posts
    1,699
    Users Country Flag
    i have tried the "mic in the light" idea but it didnt work for me. People couldnt hear me. So my mic ended up on the A pillar
    1991 BMW 318is RED E30

  9. #9
    Join Date
    May 2010
    Location
    Perth
    Posts
    311
    Users Country Flag
    I have mine on the A-pillar, barely even notice its there
    Current: '04 Astra SRI Turbo - EDS IPF Flash, 3" TBE, Quaife LSD
    Previously: Bora 4mo, cams, coilovers, tune, exhaust, brembo's etc

  10. #10
    Join Date
    Mar 2010
    Location
    Lesmurdie
    Posts
    1,019

    Mines also on the A-pillar easy to wire and hide wires and still out of the way

    2001 Turbo! 4mo Bora 'Boring' | Carbinaro CAI | Fixing broken stuff | Sorting the Turbo Goodness! | BBS Lm's 18x8.5 | KW V2's | 4 pot Brembo's

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |