Hayden and Cliffos Mk4 R32 build

**dylan8** · 09-11-2019, 09:10 PM

Originally Posted by HaydEn

After 3.5 months, wheels finally turned up and thankfully clear without spacers! YAY
17x8 ET30 Team Dynamics Pro Race 1.2’s

While not the lightest wheel around, they are the only ones that will clear without massive spacers I’ve been able to find.

...

They'd look good on my vento or your mk3..

**HaydEn** · 09-11-2019, 10:09 PM

Originally Posted by dylan8

They'd look good on my vento or your mk3..

The thought of putting mk3 size rubber on did cross my mind. But to late now.

Sent from my iPhone using Tapatalk

**Water Boy** · 12-11-2019, 05:11 PM

Not a fan of all those holes in the rad support.
My old man will be onto you!

**HaydEn** · 12-11-2019, 06:27 PM

Originally Posted by Water Boy

Not a fan of all those holes in the rad support.
My old man will be onto you!

Untouched around the radiator itself so shouldn’t effect air flow through the core.

Sent from my iPhone using Tapatalk

**HaydEn** · 14-11-2019, 10:59 PM

Got the header finalised today, v band tested and welded on so the front of the car can go back together.

Lick of paint to start.

Wrapped up for some heat management.

And then covered up, never to be seen again
Opted for the MK5 heatshield as it is substantially bigger than the MK4 and will keep the heat out of the top half of the engine bay, and more importantly away from the brake master cylinder which is awfully close.

Sent from my iPhone using Tapatalk

**beale187** · 15-11-2019, 07:58 AM

Nice work brother, looks mint! Good tip on the Mk5 shield.

**HaydEn** · 21-11-2019, 09:38 PM

Getting closer to finishing the car so put the new discs on the front and cleaned up seam sealer.

Reassembled the front end and bled the brakes. Having a few issues with one of the rear calipers. Hopefully get that sorted out sometime soon.

Sent from my iPhone using Tapatalk