DYLAN8 01 Bora

[fuzion]

disgusting.. oem wheels, what has happened? lol

[mk5_tdi]

I dont mind it. The lack of offset, width, and more tread kills it from any angle other then side on though.
Being a full face wheel I think it helps. tempted to see what the fattest rubber is I can fit on my other stockies for a giggle

Haha just not worth the money, but it would be funny to see, fat rubber low ribber on stockies spacers

[dylan8]

itll be fixed soon Pierre, I think im going to beat my 4 different wheels at 4 different shows this year. Some stupid cool and ultra rare wheels have present themselves to me in the past month or so.

fat rubber is defiantly on the cards. Going to be a tight fit having the car properly slammed on 245s though

[vwthunder]

245's FTW

Cant wait to see that, hurry up and put your 312's on

[dylan8]

245's FTW

Cant wait to see that, hurry up and put your 312's on

I did 245s for a day on the LMs pre camber, was stupid. But have a few other ideas on making it work now
nar 312mm are going on the vento, I need to keep the stocko brakes for maximum brake clearance

[Water Boy]

Needs switches!

[fuzion]

needs new wheels!

[dylan8]

few changes including:
tubular control arms with camber adjustment in the front.
Drop plates for additional camber and hub relocation.
new (stock iv had for well over a year) wheels (18x9 225/35).

plus some other major changes.
Anyone got a suggest on what to use to stick the chrome trims back on the doors etc?


I also got the ball rolling on one of many sets of wheels coming for the bora (have the above, and some others off at sand blasters as write this)
18x7.75" Simmon LE in 5x100
going to be built to 8.75" and either 9.75 or 10" with mk4 friendly offsets
I think a full rebuild with new finishes and colours, new hard ware, new lips and barrels on some of the wheels