Page 3 of 6 FirstFirst 12345 ... LastLast
Results 21 to 30 of 57

Thread: Couldn't resist

  1. #21
    Join Date
    Apr 2014
    Location
    Penrith, NSW
    Posts
    747
    Users Country Flag

    Hate electrical problems

    RE: P1426 - Tank ventilation valve open circuit

    Solenoid stuck open? Check the connector to the purge valve on top of the charcoal cannister? You should also hear a clicking sound as it open/closes to let the fuel vapors into the intake if it is working correctly.
    2004 VW Bora 4motion | 3.2 Swapped - R32 Trimmings | BBS CH | Forever fixing this bitch

  2. #22
    Join Date
    Jul 2011
    Location
    Sydney
    Posts
    620
    Users Country Flag
    Replace the air flow meter


    Sent from my iPhone using Tapatalk

  3. #23
    Join Date
    Jul 2008
    Location
    Braidwood, rural NSW
    Posts
    3,225
    Users Country Flag Thread Starter
    Why would the MAF be the problem when the issue is the car has no power over 2500 rpm because the throttle isn't opening all the way? Does the MAF stop the throttle position sensor opening?

    I had to drive to Wagga yesterday to pick up my daughter's scooter. On the way there I averaged 11.1 litres, coming back with the scooter it got 11.0 and felt slightly better to drive. Normally I'd say the long drive (7 hours) cleaned out a few things but I drive over an hour each day (and 100 ks) to get to work so there shouldn't be any stop/start gunk in the engine.

    The car was beautiful to drive despite the lack of power going up hills and having the trailer/scooter on the back made no difference to how it performed. It still slows down to 90 k's on the big hills, trailer or no trailer but doesn't get any slower and cruises at 110.

    Couldn't resist-20180819-jpg

    Next step is to check the voltage going to the accelerator and to the throttle. Might even run 5v direct to the throttle to see if that clears out some cobwebs.

    Does anyone know where I can download a wiring diagram?

    Paul
    Last edited by sports racer; 20-08-2018 at 01:36 PM.

  4. #24
    Join Date
    Nov 2015
    Location
    Canberra, ACT
    Posts
    489
    Users Country Flag
    1997 Golf CL, 2011 Caddy Life TDI, 2007 Golf TDI, 1996 Vento GL (red), 2008 Skoda Octavia TDI
    1996 Vento GL (white) - RIP

  5. #25
    Join Date
    Jul 2008
    Location
    Braidwood, rural NSW
    Posts
    3,225
    Users Country Flag Thread Starter
    Looks like they charge for the service. I'm looking for something free.

  6. #26
    Join Date
    Apr 2014
    Location
    Penrith, NSW
    Posts
    747
    Users Country Flag
    Quote Originally Posted by sports racer View Post
    Looks like they charge for the service. I'm looking for something free.
    Engine code please

  7. #27
    Join Date
    Jul 2008
    Location
    Braidwood, rural NSW
    Posts
    3,225
    Users Country Flag Thread Starter

  8. #28
    Join Date
    Apr 2014
    Location
    Penrith, NSW
    Posts
    747
    Users Country Flag
    2004 VW Bora 4motion | 3.2 Swapped - R32 Trimmings | BBS CH | Forever fixing this bitch

  9. #29
    Join Date
    Apr 2014
    Location
    Penrith, NSW
    Posts
    747
    Users Country Flag
    How's that? pm me if it didn't come through

  10. #30
    Join Date
    Jul 2008
    Location
    Braidwood, rural NSW
    Posts
    3,225
    Users Country Flag Thread Starter

    It came through fine. Now I just need to work out which bit isn't getting the full 5v to the throttle position sensor.

    Thanks.

Page 3 of 6 FirstFirst 12345 ... LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |