Here are the pics of my newly installed CAI and KNN pod filter. Let me know if you want details and prices!
From under the front bar looking up. Not the best photo i know.
![]()
Here are the pics of my newly installed CAI and KNN pod filter. Let me know if you want details and prices!
From under the front bar looking up. Not the best photo i know.
![]()
---/=========\
(]/_ O _____ O _\[)
"'(O8o)=\X/=(o8O)
'|\===------===/|
[__|========|__]
And more!
Enjoy!![]()
---/=========\
(]/_ O _____ O _\[)
"'(O8o)=\X/=(o8O)
'|\===------===/|
[__|========|__]
i hope the filter is not exposed from underneath. You dont want it to suck up water
1991 BMW 318is RED E30
Haha yeah i don't intend on doing an insurance job on it just jet. I dont think ill have a problem with the water as its still protected from the wheel and a fair way off the ground still. Ill get back to you if any problems do occur!
---/=========\
(]/_ O _____ O _\[)
"'(O8o)=\X/=(o8O)
'|\===------===/|
[__|========|__]
I got the following email off a guy today regarding some mods for the bora.
"Hi Nathan – thanks for the email, the best options are to look at what you want to achieve – performance wise – it’s a case of air induction kit and exhaust system and Revo Software upgrade. All of these will give you around 35kW increase in power.
This increase for an normally aspirated engine is huge, I have attached info on Milltek Sport exhausts and a photo of one of our preferred air kits."
Do you think 35KW is a bit of s*#t?
---/=========\
(]/_ O _____ O _\[)
"'(O8o)=\X/=(o8O)
'|\===------===/|
[__|========|__]
I would say so. Tell him to prove it by Dyno. And is it at the fly or wheels![]()
was that from eurocardriver?
i have done some research about a setup including headers, full exhaust and software upgrade that are quiet popular on the r32's. The dynos show about 205-210kw on the r32's and i believe they are around 175 stock (please correct me r32 owners if im wrong) so thats an increase of around 30kw at least and apparently the gains for a v6 bora are quiet similar. Having said this im not sure what you have been quoted for the above work but this setup runs into the $8000+ mark.. ouch. definately not enough bang 4 bucks IMO
Bookmarks