Results 1 to 8 of 8

Thread: -1 degree outside, and my window drops...

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #8
    Join Date
    Dec 2006
    Location
    Sydney
    Posts
    304
    Users Country Flag Thread Starter
    Victory is mine !

    My window was stuck to the frame with the glass, and the seats of the regulators were moving. When the ice melted, my window went flying down.

    Lucky it didn't break. My tints are mashed, so will have to get it redone.

    Pulled the trim off and yanked the window out, raised the regulators until they came into view with the door and then popped the window back in. It goes up alright, but when dropping it, one of the regulators slips out one third of the way down and it probably will drop or slide out. Window is sticking shut now.

    Is there any sort of glue or bonding agent that can be used to stick the glass to the seat so it doesn't jump out again ?!?

    Saved myself a few quid.
    Last edited by DIDZ; 03-07-2008 at 01:28 PM. Reason: Additional goodness.
    -DIDZ


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |