T6 Bull Bar and Fog Lights

[Bermagui]

It looks as if both Bullbars are not compatible with the front Parkpilot sensors. I think we would have to disable the whole system as I can't see a way to disable the four front sensors only.

[TonyMax]

The guys at my local bull bar place mount them in the bull bar (pull through the front bumper).

This is a stock photo from the East Coast Bullbars website:

[Bermagui]

QLD Bullbars 'Aerobar' built and due for install on the 15th August. I'll post a pic when it's done

[TonyMax]

Did they say they would pull the front sensors through and mount them in the bar?

[transparu]

FWIW. I put an ECB bullbar on my 2012 T5. Pretty easy to do but it does mean removal of the original (unseen) bumper bar and replacement with new bits and pieces. In 6 years it has scared all outback roos from hopping in front of my van on many outback trips.


Sent from my SM-G900I using Tapatalk

[Bermagui]

Front sensors pulled through the bar and angled down to best replicate original

[TonyMax]

Nice one, is this an off the shelf Transporter item which fitted unaltered to the Multivan?

Also I see a NSW plate, care to share price and where you had this fitted? I'm not that far from you and it looks like they did a good job.

Edit: And in other news it looks as though that bar won't interfere with the fog lights which are fitted to my Multivan!

[Bermagui]

Queensland Bullbars did some checks or mods (unsure) to be certain that the T6 Aerobar would fit the MY17 Multivan. Fitted by Specialised Automotive in Bega. $2200 delivered and $500 fitting.

[irsa76]

Bumping this thread, did you end up fitting a bar TonyMax? I'm just about to order a Multivan and a bullbar is a must. I was talking to Queensland Bullbars earlier this year and they told me they were about to verify if their Transporter bar will fit a multivan.
I'd probably go for the ECB bar though, I'm familiar with ECB products and rate them pretty highly. Might have to put the bite on some of my contacts to see if it will fit.

[irsa76]

Front sensors pulled through the bar and angled down to best replicate original

Saw you today, can't remember where though, I was in my company Hiace.
Had a chat with Pride Auto in Phillip, ECB will not fit a Multivan due to compliance issues. Apparently because the Multivan and Transporter are complianced differently ECB will have to get the bar(s) complicanced for both models seperately.
Got a quote for a Queensland bar instead, just have to put some coins aside. And see if they will do a couple of mods to it for me.