I am chasing some information on the T5 multivan A/c compressor and system.
The system has stopped cooling but all controlls seem to be working.Heater is operated when temp is set to high.
Checked with gauges gas is ok
Compressor looks to be direct drive and information in another forum suggested that no clutch fitted but control of gas flow is done by a swash plate in the compressor (very hard to see due to position of compressor )
If drive had failed would this be noticiable from external look at drive hub
What testes can be done to make sure that electrical signal is getting to compressor.(Hard to get at wiring with out major work)
Problem with no manuals and no one with experience on multivan in local area
Any information would help
First check the A/c compressor fuse has not blown. This is mostly likely cause. Not use which one it is in the fuse box. The hand book should have the details.
Regards,
Scott
Bookmarks