There is black ones available, and we are thinking of getting one or painting the white one to match the car. For some reason the electrician didn't seem to be able to get black even though I asked him.
On the inside we have one double switched socket just behind the fridge which the mains lead for the fridge goes into, and one spare for outside extension lead etc, and the other is where the flip out ash tray is opposite the sliding door, behind the drivers seat. When the ashtray is removed the hole is about the right size. Only trouble now is that since I bought the solar cells which you can see in the blue pack beside the bed, it covers the power sockets, so I might have to move them to the left a bit.
![]()
The mains circuit breaker is a bit tricky. At first we were going to have it in the boot somewhere on the same side as the inlet, but worried that luggage might knock it off, so ended up with it inside the plastic cover panel inside the back on the right. As it is about 3-4 inches thick and the space was about that size near the forward end, we had it mounted there and cut a rectangle hole in the cover so only the switch top is seen. Only trouble is that when you try to remove this side cover, the plastic clips break and you have to go to VW and get some more. Also it is hard to cut the hole so it fits perfectly when the cover is replace.
![]()
Its not an easy job overall, and we had a bit of trouble finding a shop that would do it, but we found one that would come to our house and I already had a lot of stuff removed such as the rear bed stand and some of the gray side covers before they arrived. So in my case I more or less came up with the design and they just did what I wanted.
I also got a written certificate to make it lawful.
Brian
Bookmarks