t5 bullbar

[Seano]

Sorry for the delay on the pic's. Had to go on holidays

You know how it is.

http://i.imagehost.org/view/0866/T5_Nudge_bar

http://i.imagehost.org/view/0726/T5_nudge_bar_02

$900.00 fitted

Tombi

[coastie]

Do they need to cut the front plastic bumper bar to access the chassis rails? It looks like there are extensions from the chassis rails to the bottom of the bar.

[Tombi]

Yes Coastie. You have to cut a slot in the fog light panel, which is removed easily. Did seem like a bit of a shame to start cutting up a new bumber, but happy with the result.
The guy fitting the bar was not confident enough to make the cut outs, neither was I , but I mustered up the courage eventually.

Ther are only 3 nudge bars for T5's that I could locate in Aus' and 2 require the bumper to be cut. This East Coast Bar is the neatest fit IMO.

The other bar (don't know who makes them) mounts beneath your bus and lowers your ground clearance.

Tombi

[jimmyd]

Which coversion are you going for?

The van is at Discoverer Campers in Revesby. Pick it up next week. The problem with my van was the roof. Being an ex ambo, had mid roof , so most companies would not take the mid roof off and replace with a pop top. My van now has pop top roof, wired up for solar, all plumbing and wiring is complete, flooring is in, now just the cabinets etc to finish off. Was supposed to pick it up this week, but was delayed cause the chippy broke his foot !! I haven't decided on full bull bar or nudge bar yet, my van has fog lights, so don't want to interfere with em. Thanks again fellas for all your replies !!
j

[Tombi]

Luv to see some pic's when you get your bus back.

[jimmyd]

The van is at Discoverer Campers in Revesby. Pick it up next week. The problem with my van was the roof. Being an ex ambo, had mid roof , so most companies would not take the mid roof off and replace with a pop top. My van now has pop top roof, wired up for solar, all plumbing and wiring is complete, flooring is in, now just the cabinets etc to finish off. Was supposed to pick it up this week, but was delayed cause the chippy broke his foot !! I haven't decided on full bull bar or nudge bar yet, my van has fog lights, so don't want to interfere with em. Thanks again fellas for all your replies !!
j

Well, I picked my van up on friday, drove back to Brissy on saturday. Very happy with the conversion. I was told by the fella's at Discoverer that it was quite a big job taking the mid roof off. So the van has decent sized rock and roll bed (1830 X 1380 ) ,roof bed , 80l fridge, microwave, 100ah second battery with 240v charging and provision for solar, cold water shower and the interior insulated and relined ( including the roof of the driver's area). Now just have to get a bull bar fitted !!