T5.1 Mirror Dip on reverse?

[The_Hawk]

Is this an available option for all new Multivans?

Does anyone happen to know which blocks need to be updated in VAG-COM to get it running?

[Transporter]

Look in comfort and convenience if they have long coding helper, it should be easy as ticking the box. But I think there might be a missing control module for that. It usually comes with memory seats option.

Logger could know more.

[The_Hawk]

I'm debating at the moment what to upgrade to. I have an eBay knock off cable runing the really old VAG-COM software. Great for the MK3 since the computer only has a few functions anyway (basically to scan and clear codes). But the van is a wee bit newer and will need a new interface.

I'm debating something like the V-Checker Pro or if I just go all out and get the VAG-COM Cable for $350 (Don't know that I need the pro kit with the box and adaptors so don't need to spend the extra $250)...

Any suggestions?

[Cousin]

I know this doesn't answer your question Hawk, but the small parabolic mirrors I've put on my side mirrors, amongst other things, allows me to see down both sides of the van, including gutters.
Makes it much easier to park

M

[Transporter]

I'm debating at the moment what to upgrade to. I have an eBay knock off cable running the really old VAG-COM software. Great for the MK3 since the computer only has a few functions anyway (basically to scan and clear codes). But the van is a wee bit newer and will need a new interface.

I'm debating something like the V-Checker Pro or if I just go all out and get the VAG-COM Cable for $350 (Don't know that I need the pro kit with the box and adapters so don't need to spend the extra $250)...

Any suggestions?

Get VCDS,
Free upgrades, knowledge database, easy data logging, graphing and Ross-Tech back up is excellent.

[The_Hawk]

Get VCDS,
Free upgrades, knowledge database, easy data logging, graphing and Ross-Tech back up is excellent.

I figured I would probably end up there anyway... so just ordered one.

...and now we play the waiting game...

[The_Hawk]

Well the waiting game is over and the cable is here, I had a hunt through (mind you it was in the rain in the driveway last night) and didn't find anything that looked obvious, but to be fair it wasn't a real hard look, just wanted to make sure the cable was working.

Does anyone know if the mirror dip is an available option or where it might be to change?

I have these modules if it helps:

VCDS Version: Release 10.6.1
Data version: 20100831

Monday,08,November,2010,18:24:02:35849

Gateway Installation List: 6N0 909 901

01-Engine -- Status: OK 0000
02-Auto Trans -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
04-Steering Angle -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: OK 0000
10-Park/Steer Assist -- Status: OK 0000
15-Airbags -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: Malfunction 0010
25-Immobilizer -- Status: OK 0000
69-Trailer -- Status: OK 0000

[Transporter]

I'm not sure if it can be done without the memory seat controller.
I pulled these 2 screens from VCDS


Address 06: Seat Mem. Pass Labels: None
Part No: 7L0 959 760
Component: Sitzverstellung 0701
Shop #: WSC 00000 000 00000
VCID: F7F703A5FFBF