Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: T4 Brake pads - source? price?

  1. #1
    Join Date
    Jun 2006
    Location
    with the dust and flies in western Victoria
    Posts
    784

    T4 Brake pads - source? price?

    My 2001 T4 Transporter (15"wheels) has finally chewed through its (presumably) front brake pads.....it's only taken 142,000km.

    Can anyone provide me with options as to pad sources and prices?

    As much as I'd love to go with genuine parts the mere thought of asking for a supply only quote from the parts counter at the local dealer fills me with dread. So I'd love to go in somewhat informed.

    I am aware that in the aftermarket I can get pads from Bendix and EBC but others....and how much?

  2. #2
    Join Date
    May 2006
    Location
    Adelaide South Australia
    Posts
    1,296

    Smile

    [QUOTE=Seano;366090]My 2001 T4 Transporter (15"wheels) has finally chewed through its (presumably) front brake pads.....it's only taken 142,000km.

    Well they haven't lasted very well

    Imparts [in Adelaide] have Textar brand for around $100. They would need a VIN no though to be absolutely right.
    Understand how it works, troubleshoot logically BEFORE replacing parts.
    2001 T4 TRAKKA Syncro 2.5TDI,2006 Mk5 2.0TDI Golf manual,2001 Polo 1.4 16V manual [now sold], '09 2.0CR TDI Tiguan manual,
    Numerous Mk1 Golf diesels

  3. #3
    Hi Seano,

    Do you pads have an electronic wear sensor wire?

    And do they look like this:
    http://www.atap.com.au/atap/ATAPWEBD...%20(Small).jpg

    Or this one:
    http://www.atap.com.au/atap/ATAPWEBD...%20(Small).jpg

    I know Bendix says the later, but they're European listings are pretty weak.

    Regards,
    Greg
    GSL RallySport 1300 884 836
    Sick of paying too much for performance brake pads? Want high performance with low rotor wear?
    QFM Performance Pads

  4. #4
    Join Date
    Jun 2006
    Location
    with the dust and flies in western Victoria
    Posts
    784
    Thread Starter
    Quote Originally Posted by gslrallysport View Post
    Hi Seano,

    Do you pads have an electronic wear sensor wire?

    And do they look like this:
    http://www.atap.com.au/atap/ATAPWEBD...%20(Small).jpg

    Or this one:
    http://www.atap.com.au/atap/ATAPWEBD...%20(Small).jpg

    I know Bendix says the later, but they're European listings are pretty weak.

    Regards,
    Greg
    They look like the first one....156x58 but I'll have to confirm somehow. And mine have the sensor in the left front pad...

    I have had some feedback from RDA and they've quoted me $75 plus delivery for their RDA Extreme pads in this size. They also supply the EBC brand that is popular with T4 owners in the States but they don't have them in the required type...

    The rear pads are very different, tiny & nearly square!! But I'd be surprised if they are worn...
    Last edited by Seano; 05-08-2009 at 02:20 PM.

  5. #5
    Ok, assuming it is the first option we can do a few options. Starting from the cheapest, would be the RDA entry level pad, looking at $33, those RDA Extreme which they quoted you on we can do for $49. Up from that, and far and away the best quality pad of the bunch would be Remsa, but these are a bit dearer at $127.

    Remsa aren't particularly known in Australia, but they're the largest European pad manufacturer, and part of the TRW group. Good for about 650 degrees, which is about 150 degrees more than the RDA extreme.

    If it works out to be the second option I'll re price them up.

    Cheers,
    Greg
    GSL RallySport 1300 884 836
    Sick of paying too much for performance brake pads? Want high performance with low rotor wear?
    QFM Performance Pads

  6. #6
    Join Date
    Jun 2006
    Location
    with the dust and flies in western Victoria
    Posts
    784
    Thread Starter
    Thanks Greg for your help. Pads arrived on Friday. Will go on tomorrow-ish.

  7. #7
    No dramas, PM your email or fax and I'll fire your invoice through. Also, I forgot to tell you, they may have come in a Remsa OR a TRW box. Some of the rarer stuff gets brought in in a TRW box, so just in case it did, it's still Remsa (Remsa is part of the TRW Group), but just didn't get reboxed for this particular market.

    Cheers,
    Greg
    GSL RallySport 1300 884 836
    Sick of paying too much for performance brake pads? Want high performance with low rotor wear?
    QFM Performance Pads

  8. #8
    Join Date
    Jun 2006
    Location
    with the dust and flies in western Victoria
    Posts
    784
    Thread Starter
    Came in a TRW box but you'd already mentioned who owned what so not fussed. PM sent.

  9. #9
    Join Date
    Dec 2008
    Location
    Lake Macquarie NSW
    Posts
    43
    Watch what you do changing pad material I have Lucas brakes on my T4 ex ambo auto & I did a down hill from hanging rock NSW with an empty van with a set of EBC pads on 67000 klm disc rotors that were still fat enough to pass the replacement size & got to stand on the pedal real hard by the botom .
    Next trip down the montain I locked the trans in 2 nd gear & no problems so as the amboes did I replaced the rotors & the pads after market from the same Government supplyer they buy from for under $200,00 for the fronts .
    The ambo service changed pads & Rotors @ 30000 Klm as they get a hiding in their work with .the weight they have on board the rear brakes get to take some of the load via the sencing device on the rear suspension I may look into that soon as the rear is not doing any work with the heavy suspension coils & shocks fitted to these machines mess with the bias valve that only turns on when its loaded wich is not a lot in my case ,

    You as always need your Vin # when shoping or you will get the wrong rotors or pads for your T4 been there done that .
    TC

  10. #10
    Join Date
    Apr 2007
    Location
    Adelaide hills, SA
    Posts
    9,708
    Users Country Flag

    Just a word of caution about RDA brake pads. I used them on a few different cars and I had to replace them after customers complained that they were noisy. I wouldn't touch them since.
    They look OK in the box, but that's where it ends.

Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |