The one on the top of the housing is for the glo plugs the other on the side is a double sender 4 terminals ,it operates the over temp light and the guage ,was able to get both to operate by shorting the terminals so the guage works just not getting the message ,il see what happens tomorrow when i give it a longer run down to the rego place ,have had it hot enough to kick the fans in but nothing on the guage ,got some front discs and calipers and disks off a 97 and converted to 15 inch rims ,will have to check the speedo against GPS ,may be interested in steer but as im moving house in 3 weeks, it will be on the back burner thanks guys for your help PUGS
from what i can work out the turbo engine is 1y and non turbo 1x ,i located a sender at HSY at Nerang just up the road ,2 senders in one one operates the guage the other the over temp light ,the temp light was flashing on the way to rego but not on the way back ,the guage not at all ,could be a bleeding issue haVe to check the manual ,im going to have to drain it to replace the sender so im not to worried ,it passed rego ,got the plates on it all ready to go ,PUGS
Bookmarks