Multivan Rail

[gus]

Hey I was wondering if anyone had sourced or made their own bolt system for the multivan floor rail system.

I am thinking about putting a couple of bicycle fork attachements on a piece of flat bar then attach the flat bar to the floor rails.

Thanks

[Transporter]

I made my own, using the hook's wholes. Basicly welded 2 L profiles with the space for the 25x25 squere tubing, drilled the holes in the rails every 100mm. I'm happy with it, does what I need.

[Gybesports]

It would be really handy if VW sold those brackets as a part so people could use them to retro fit all kinds of stuff.

[Transporter]

Maybe I should start production.

[MultiplexMan]

I have a bag of square nuts that work in the Multivan floor slots. They are 20mm wide so only really for light/medium load. Happy to post a handful out. I have them anchoring my benches and kitchen modules. They are OK but could be slightly wider and longer.

This Saturday I'm milling a bunch of rectangular nuts 22mm wide x 40mm long. These will be rated to full floor load as per the VW originals - as found securing the table and various Multivan accessories.

[rob64981]

Have a look at these pictures...
Might help you make something...
2007 Transporter 7H-7-000 001 >> 7H-7-200 000 VW Replacement Parts
VW sell the locating clamps in OZ for $40 in the UK they are £7 which is about $14.
Part number 5 on this drawing is the VW part..
2007 Transporter 7H-7-000 001 >> 7H-7-200 000 VW Replacement Parts
7h5885297b is the part number for anyone thats interested.
Rob