Multivan with 19's and 40mm lowering springs

[BLog]

It took a while but I’ve finally got the 19” rims on the Multivan and lowered it using H&R springs. The springs have only been in a week and at this stage the ride height has dropped about 25-30mm in front and 40-45mm at the rear.

van02.JPG
from this:

van03.JPG
van01.JPG
to this.

Looks much better not having the backend jacked up so much and the ground clearence is still very practical.

[KI11Z]

i like it! are they bmw X5 rims?

[BLog]

Sure are, off an e53 X5. 19"X9" 48p offset front. 19"x10" 45p offset rear.

[coastie]

Looks good, how are they for steering clearance, do the rub on full lock?

[GoLfMan]

nice dude
real different with the X5 rims aswell! and 10" at the back !!!!

[phaeton]

You'll have to come to the next SA meetup so we can have a drool

[BLog]

No rubbing problems at all, the front has heaps of room, the rear has about 5-10mm gap on the inner guard and about a 2mm gap to the interior trim when you open the sliding doors

[Ivo]

Look good, are they load rated?

[BLog]

Tyres are Hankook K110s - 245/45R19 102 load rated on the front and 275/40R19 105 load rated rear. They are an extra reinforced tyre and not cheap

[coastie]

Excellent work, would you be able to post a rear on shot to show the width with 10" rims and tyres.