Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Front Row two passenger seats.

  1. #1
    Join Date
    Feb 2012
    Location
    Brisbane Australia
    Posts
    5
    Users Country Flag

    Front Row two passenger seats.

    Hello everyone,
    I recently bought VW Transporter T5 2005 model and I got only two seats that is Drive and one passenger.
    I have seen online people selling two seats for the front row. Wondering if someone know where I can take my van and they fit this twin seat on my van.
    I am not an auto mechanic so i need installation as well.
    Any info would be help, thanks.

    Regards
    Ron

  2. #2
    Join Date
    Jul 2007
    Location
    Sydney
    Posts
    326
    Users Country Flag
    The bench seat is a VW option.

    Try your local wreckers first. Put a post in the Wanted section. Many people go the other way - that is, take out the bench seat and install two bucket seats.

  3. #3
    Join Date
    Feb 2012
    Location
    Brisbane Australia
    Posts
    5
    Users Country Flag Thread Starter
    Quote Originally Posted by MultiplexMan View Post
    The bench seat is a VW option.

    Try your local wreckers first. Put a post in the Wanted section. Many people go the other way - that is, take out the bench seat and install two bucket seats.
    Thanks mate! ...i had plan to visit local wreckers too ....will post one request if someone is selling one, thanks again.
    Regards

    Ron

  4. #4
    Join Date
    Oct 2008
    Location
    Mt Cotton
    Posts
    3,756
    I think you will find the dual cab T5 ute may have the 3 person configuration for the front row there may be some others as well . At least if you can get the factory seat it should bolt straight in as most of the vans have mounting points for the different seating options . Just remember to get a certification from an approved fitting centre . If you go aftermarket you have to make sure it has been complied and certified to current ADR regulations . I have my doubts any one would make a 3 rd seat option for the T5 as the tooling and testing costs would not make it a profitable thing but I may be wrong .

  5. #5
    Join Date
    Feb 2012
    Location
    Brisbane Australia
    Posts
    5
    Users Country Flag Thread Starter
    thanks Sunny,
    I will keep in mind....i found this www kmjeuroparts com and sent them a request email...its close to my place, so planning to visit them if they can do something for my need.
    Cheers!


    Quote Originally Posted by Sunny43.5 View Post
    I think you will find the dual cab T5 ute may have the 3 person configuration for the front row there may be some others as well . At least if you can get the factory seat it should bolt straight in as most of the vans have mounting points for the different seating options . Just remember to get a certification from an approved fitting centre . If you go aftermarket you have to make sure it has been complied and certified to current ADR regulations . I have my doubts any one would make a 3 rd seat option for the T5 as the tooling and testing costs would not make it a profitable thing but I may be wrong .

  6. #6
    Join Date
    Oct 2011
    Location
    Newcastle
    Posts
    5
    yes, you can get an aftermarket bench seat for a T5. I looked into it as an option to carry an extra passenger in a std van before we found the crewvan. From memory they weren't all that expensive, hazy on the exact number but I think sub $1000.

    Techsafe - Cabin Seating Products

  7. #7
    Join Date
    Jul 2007
    Location
    Sydney
    Posts
    326
    Users Country Flag

  8. #8
    Join Date
    Feb 2012
    Location
    Brisbane Australia
    Posts
    5
    Users Country Flag Thread Starter
    Thanks mate, I rang up Techsafe today and they referred me to local installer in Brisbane. Its called Auto Extras 1800 811 626.
    They quoted about $1980 inc GST for front seats or cheaper $1380 for 2nd row for a single seat. Still sounds very dear to me.
    Just need to hunt for wreckers as KMJ Europarts is out of such seats at the moment.

    eBay option will cost me same as they are after $1000 for seat, delivery charges and installation will come to same $2000.

    Ron


    Quote Originally Posted by top_oz_bloke View Post
    yes, you can get an aftermarket bench seat for a T5. I looked into it as an option to carry an extra passenger in a std van before we found the crewvan. From memory they weren't all that expensive, hazy on the exact number but I think sub $1000.

    Techsafe - Cabin Seating Products

  9. #9
    Join Date
    Oct 2008
    Location
    Mt Cotton
    Posts
    3,756
    The price is about normal as I used to make extra seats in my old company 12 years ago , you have to remember the building and testing is the most expensive part and you have to get the seats certified by an engineer . I would suggest that if its only the front 3 person set up you are after go with original if you can .At $1500 for the whole lot thats a huge bargain for the ones on Ebay , would be worth a tank and a half of fuel to drive down and pick them up in person.

  10. #10
    Join Date
    Oct 2011
    Location
    Newcastle
    Posts
    5

    I had a chance to look up my notepad at work and my memory must be failing me.

    My quote a bit cheaper, but same ballpark.

Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |