Page 3 of 6 FirstFirst 12345 ... LastLast
Results 21 to 30 of 59

Thread: Engine replacement.

  1. #21
    Join Date
    Dec 2008
    Location
    Sydney/Canberra
    Posts
    5,523
    Users Country Flag

    Passat Alltrack motor would be the same base engine, if not very similar.
    '07 Transporter 1.9 TDI
    '01 Beetle 2.0

  2. #22
    Join Date
    Feb 2009
    Location
    NSW
    Posts
    1,087
    Thread Starter
    What is the engine code?

    Sent from my Pixel 2 using Tapatalk

  3. #23
    Join Date
    Feb 2009
    Location
    NSW
    Posts
    1,087
    Thread Starter
    What about swapping the engine and box out. Is the box connected to the rear Diff or does the drive go through a separate transfer case (???) type of setup?

    Sent from my Pixel 2 using Tapatalk

  4. #24
    Join Date
    Feb 2009
    Location
    NSW
    Posts
    1,087
    Thread Starter
    Stop leak hasn't worked. Now losing oil and coolant...

    Anyone know of a cheap rs4 engine lying around???

    Sent from my Pixel 2 using Tapatalk

  5. #25
    Join Date
    Apr 2007
    Location
    Adelaide hills, SA
    Posts
    9,710
    Users Country Flag
    Did you try JB Weld PermOseal? Seals a lot of coolant leaks almost immediately.
    Available from Bursons or ebay.

  6. #26
    Join Date
    Feb 2009
    Location
    NSW
    Posts
    1,087
    Thread Starter
    No. That's the next stop. But it's getting Mayo under the cap so I'm thinking it's much worse.

    Sent from my Pixel 2 using Tapatalk

  7. #27
    Join Date
    Feb 2009
    Location
    NSW
    Posts
    1,087
    Thread Starter
    Is there a site that tells you the compatibility between engines and boxes?

    Sent from my Pixel 2 using Tapatalk

  8. #28
    Join Date
    Apr 2007
    Location
    Adelaide hills, SA
    Posts
    9,710
    Users Country Flag
    Flush the cooling system, using good radiator flush, refill with the fresh coolant and put 1 PermOseal in the reservoir once warmed up and run engine for 30 minutes after thermostat opened.

  9. #29
    Join Date
    Dec 2008
    Location
    Sydney/Canberra
    Posts
    5,523
    Users Country Flag
    Quote Originally Posted by ozgti View Post
    Is there a site that tells you the compatibility between engines and boxes?

    Sent from my Pixel 2 using Tapatalk
    Just tried looking into this now.

    Part numbers are all over the place, with regards to what is compatible, and what isn't. Part numbers for long motors are all different between Amarok, T5GP, and Passat, even though in theory they're all pretty much the same generation TDICR motor.

    Wreckers over here are taking the pi$$ on prices. Can get a rebuilt one out of the UK, for circa $5K. A Used one here, is twice that amount, and you'd still have to pay someone to swap the whole lot over.
    Last edited by Umai Naa!!; 27-06-2018 at 08:14 PM.
    '07 Transporter 1.9 TDI
    '01 Beetle 2.0

  10. #30
    Join Date
    Aug 2016
    Location
    NSW
    Posts
    513
    Users Country Flag

    Yeah......you can see why the Pommies get a shock when they come over and buy one to go around Australia and are used to the costs over there.
    2018 Crafter Runner
    T5.1 6sp manual.

Page 3 of 6 FirstFirst 12345 ... LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |