Results 1 to 5 of 5

Thread: Driver side airbag fault

  1. #1
    Join Date
    Aug 2010
    Location
    Queenscliff, NSW
    Posts
    67

    Driver side airbag fault

    Removed my driver seat to do some work.
    Disconnected the airbag cable, simple plug disconnect and reconnected when seat back in. Airbag light is on, vcds will not reset the light.
    Any tips on fault finding, can't find a fuse? Plug connector only goes one way so it can't be that.
    Cheers
    Zeb
    Transporter T5.1 MY2011

  2. #2
    Join Date
    Feb 2011
    Location
    Newcastle
    Posts
    6,069
    Users Country Flag
    Did you disconnect the battery when you took the seat out? (always good idea to do so).

    Sometimes you need to drive the car for it to clear certain faults (eg ESP and traction control errors go away once the moves forward about 50m).
    2017 Ford Fiesta ST the go kart

    2015 Audi SQ5 bi-turbo V6 TDI family hauler

  3. #3
    Join Date
    Aug 2010
    Location
    Queenscliff, NSW
    Posts
    67
    Thread Starter
    Quote Originally Posted by Lucas_R View Post
    Did you disconnect the battery when you took the seat out? (always good idea to do so).

    Sometimes you need to drive the car for it to clear certain faults (eg ESP and traction control errors go away once the moves forward about 50m).
    No, didn't disconnect battery, but i have done the same before with no problem.
    I've been driving it for a while now, no change.

  4. #4
    Join Date
    Jun 2011
    Location
    Ringwood, VICTORIA
    Posts
    11
    Users Country Flag
    I am probable telling you something that you have already checked 3 times. Simple connections can easily be bent when something is pulled apart or plugged back together.
    Stop, take time and visually check your connections and make sure the connections are also clean. Check the wiring leads to the connections. Otherwise it could be a long circular road back to the simple plug and wires that have been accidentally damaged.
    Cheers

  5. #5
    Join Date
    Aug 2010
    Location
    Queenscliff, NSW
    Posts
    67
    Thread Starter

    Still haven’t found a solution to this, checked all fuses and wiring, could be the SRS management unit? Very reluctant to take it to a dealer as I can only imagine the cost! but it could be my only option.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |