Support VWWC

Results 1 to 8 of 8

Thread: 2011 CFCA engine EGR issues

  1. #1
    Join Date
    Feb 2024
    Location
    Merimbula
    Posts
    10
    Users Country Flag

    2011 CFCA engine EGR issues

    Hi all
    Would love to get advice on EGR delete and Remap for 2011 2lt biturbo 4 motion transporter and anyone around NSW area that has experience with this or what problems can arise.
    Thanks heaps

  2. #2
    Join Date
    Feb 2011
    Location
    Newcastle
    Posts
    6,074
    Users Country Flag
    Try Zadtec Performance in Brookvale, Sydney. They are distributors for Celtic Tuning (a UK based tuning company) and can likely sort you out with your tuning needs. Not sure if your car has a DPF, but if it does - then usually you need to delete both DPF and EGR at the same time.....speaking from experience......I tried to do an EGR delete on my Audi SQ5 and the DPF stopped doing regens.

    Zadtec Performance AUS | Sydney NSW

    +20% power with Stage 1 ECU Remap on Volkswagen Transporter T5 2.0 BiTDI 134 KW (2010-2015)
    2017 Ford Fiesta ST the go kart

    2015 Audi SQ5 bi-turbo V6 TDI family hauler

  3. #3
    Join Date
    Feb 2024
    Location
    Merimbula
    Posts
    10
    Users Country Flag Thread Starter
    Thanks for this info. I would like to find an EGR delete kit and emulator that is sold in Aust.

  4. #4
    Join Date
    Feb 2011
    Location
    Newcastle
    Posts
    6,074
    Users Country Flag
    Darkside Developments in the UK would have an EGR blanking kit. Ive ordered some parts from them over the past few years and they deliver quickly.

    Doubt you will find an emulator locally as they really aren't popular to use outside of Europe. Link below to one from Poland.

    VW Transporter T5.1 / T6 EGR Blanking Kit for 2.0 BiTDI CFCA Engine

    EGR valve simulator with blanking plates for VW T5 with 2.0 BiTDI CFCA engine
    2017 Ford Fiesta ST the go kart

    2015 Audi SQ5 bi-turbo V6 TDI family hauler

  5. #5
    Join Date
    Feb 2024
    Location
    Merimbula
    Posts
    10
    Users Country Flag Thread Starter
    Thanks heaps. I had found the one from Poland, but a bit of a job getting it to Aust. Really wanted to hear from people with experience on if they are worth it before I jump in.
    Has any one had experience with this emulator and what happens to DPF. Does it need heat from EGR to work properly or will blanking off EGR destroy DPF even with emulator in?

  6. #6
    Join Date
    Feb 2011
    Location
    Newcastle
    Posts
    6,074
    Users Country Flag
    Being a 2011 and the older models being not quite as 'smart' as newer cars, you might be able to get away with using an emulator for the EGR and not effecting the DPF operation.........but in my experience (on a 2015 model car) I was not able to delte the EGR without also doing the DPF. It caused a whole world of pain, and my DPF stopped doing its regular regens (which it does every 400-500km usually) and totally clogged the DPF and the car went into full blown limp mode. I had to physically remove the DPF and clean all the soot out, then had to get the cars ECU retuned to reverse the previous attempt to map out the EGR.

    Put it this way, no one sells an EGR emulator for my car/engine so thats probably because it wont work on my car/engine. But if they sell them for your car/engine then fair chance it should work. Worth a try anyway. Im sure that shop in Poland will post to Australia - might just cost you $50-80 for the priviledge.
    Last edited by Lucas_R; 27-02-2024 at 10:23 AM.
    2017 Ford Fiesta ST the go kart

    2015 Audi SQ5 bi-turbo V6 TDI family hauler

  7. #7
    Join Date
    Feb 2024
    Location
    Merimbula
    Posts
    10
    Users Country Flag Thread Starter
    Thanks heaps. I have tried to purchase through their ebay store, but can't get shipped to Aus. I have emailed Tafmet to see if I can deal direct.

  8. #8
    Join Date
    Aug 2024
    Location
    Mackay, Qld
    Posts
    2
    Users Country Flag

    AEA... did you get your EGR sorted? I have just got a 2012 4motion Multivan and am trying to work out a course of action.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |