Results 1 to 5 of 5

Thread: 2008 VW Transporter T5 RHS drive shaft worn down

  1. #1

    2008 VW Transporter T5 RHS drive shaft worn down

    Currently travelling around Australia and we have come down with some bad luck. RHS drive shaft has completely worn down where the stub axle connects. So the engine starts fine, I can change gears but when accelerating it gives off a deafening screech from the stub axle spinning in the shaft and not grabbing the teeth. Just wanted to see if anyone has experienced this problem and how they went about sourcing parts?

  2. #2
    Join Date
    Dec 2008
    Location
    Sydney/Canberra
    Posts
    5,523
    Users Country Flag
    Very common failure.

    You'll need a new stub shaft at least, and possibly the driveshaft as well.
    '07 Transporter 1.9 TDI
    '01 Beetle 2.0

  3. #3
    Join Date
    Aug 2016
    Location
    NSW
    Posts
    507
    Users Country Flag
    I got mine from VW.
    There are cheaper ones on ebay but you have to make sure you get the right one as there are a few variations.
    2018 Crafter Runner
    T5.1 6sp manual.

  4. #4
    Join Date
    Aug 2017
    Location
    Holsworthy, NSW
    Posts
    101
    Where are you currently located? If in Sydney I have one off a wreck with automatic front wheel drive.

  5. #5
    Join Date
    Oct 2008
    Location
    Mt Cotton
    Posts
    3,752

    I posted about this subject a while ago , I was able to get one from a supplier here in Brisbane same day and my T5 is a rare one as its a 2.0 petrol manual job .Australian CV Joints and Power Steering I got new drive shaft with CV's and spline for a real good price .VW price for parts . You can see the new parts before fitting and they came with two year warranty .
    Last edited by Sunny43.5; 30-05-2018 at 11:29 PM.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |