Support VWWC

Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: Caddy - Rear Seat Retrofit

  1. #1
    Join Date
    Feb 2009
    Location
    Please Enter Location
    Posts
    6

    Caddy - Rear Seat Retrofit

    G'day folks,

    Is it possible to fit a set of two removable rear seats & belts (such as those that are fitted in the rear of the 'Caddy Life') to a commercial single sliding door Caddy, and have it registerable?

    Thanks very much.
    Grant.

  2. #2
    Join Date
    Jun 2006
    Location
    Orange NSW
    Posts
    5,745
    There's a Cleaning mob in town with a Caddy van that has rear seats. And i do recall someone mentioning something on here a while ago about it.

    So, yes it appears it is possible. I've thought about it for my Caddy.. Didn't look into it any further though.

    APR Tuned | KW Suspension | INA Engineering | Mocal Oil Control |
    Website: http://www.tprengineering.com
    Email: chris@tprengineering.com

  3. #3
    Join Date
    Feb 2009
    Location
    Please Enter Location
    Posts
    6
    Thread Starter
    Thanks Preen.

    Yes, I have found it is possible, you can install the seats yourself, or have a professional do it. Registration requires an engineer's inspection and certificate.


  4. #4
    Join Date
    Jul 2008
    Location
    Melbourne
    Posts
    10
    Quote Originally Posted by Zombie View Post
    Thanks Preen.

    Yes, I have found it is possible, you can install the seats yourself, or have a professional do it. Registration requires an engineer's inspection and certificate.

    The rear seat only has one seatbelt connected to the actual seat in the caddy life (looking at photos on the VW Aus site), and the other is coming from the left of the seat as its mounted to the actual vehicle. Is there a mount hole/mount etc in the commercial caddys for this or would it involve something more?

  5. #5
    Join Date
    Feb 2009
    Location
    Please Enter Location
    Posts
    6
    Thread Starter
    Dunno, I simply phoned a business that performs seat modifications, they advised it was possible and it did not sound difficult. The only requirement was the Engineers certificate for registration.

    I had also found using google some sites showing rear seat mods for disabled units etc in caddys.

  6. #6
    Join Date
    Jan 2014
    Location
    Perth, WA
    Posts
    7
    Users Country Flag
    I was quoted $4,400 for one row of seats the other week in Perth!!

  7. #7
    Join Date
    Jan 2012
    Location
    Melbourne
    Posts
    46
    Users Country Flag
    I had a 3 seat bench installed in my maxi when I got it. Cost was $2400ish trade including the engineers inspection and report.
    I was after a specific seat though which had built in seat belts.
    Bench seat up

    Seat folded down

    Seat rocked forward

    The false floor extension of my sliding drawers sitting over the seats folded down. Coincidentally I fitted the false floor back in tonight after having it out for 2 1/2 years
    Last edited by fmflex; 28-02-2014 at 12:11 AM.

  8. #8
    Join Date
    Jan 2014
    Location
    Perth, WA
    Posts
    7
    Users Country Flag
    That's brilliant. Do you remember the name of the company that did it?

  9. #9
    Join Date
    Jan 2012
    Location
    Melbourne
    Posts
    46
    Users Country Flag
    I'm not sure I'm allowed to post up their details as they're not a sponsor on the forum. PM me and I'll pass along some details.

  10. #10
    Join Date
    Jan 2014
    Location
    Perth, WA
    Posts
    7
    Users Country Flag

    Sure. Ta for that.

Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |