Hey I can use a loophole in the software to enable a regen to start, I’m an agent for Pendle Performance LTD in the Uk.
2017 V6 Amarok 21000ks. Went directly into limp mode with no prior warnings. No DPF warning.
OBDeleven scan shows:
P246300 - Particulate filter restriction - Soot accumulation bank 1.
P010500 - Manifold absolute pressure/ Barometric pressure circuit.
P200200 - particulate trap bank 1 efficiency below threshold.
Unable to force DPF regen.
Do MAP sensors have any history of premature failure.
Any advice would be appreciated. Thanks.
Hey I can use a loophole in the software to enable a regen to start, I’m an agent for Pendle Performance LTD in the Uk.
Performance Tunes from $850Wrecking RS OCTAVIA 2 Link
Or remove the DPF's and flush them out with water, refit them and then reset DPF info with VCDS software. This is what I had to do on my SQ5 (similar-ish engine to the V6 Amarok) as neither myself nor my VW specialist mechanic could get the car to force a regen.
Once you get it sorted I suggest you buy a Carista dongle ($40 odd bucks) and an App called VAGDPF (for Android phones) which you can use to monitor the DPF and how full it is etc, so you know when to take the car for a drive to let it clean itself. With my car, its every 500km or so.
VAG DPF app on Android to monitor DPF
Last edited by Lucas_R; 17-07-2020 at 02:13 PM.
Bookmarks