Support VWWC

Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: Wheel fitment?

  1. #1
    Join Date
    May 2009
    Location
    Melbourne
    Posts
    88

    Wheel fitment?

    I'll admit I'm a noob when it comes to wheel fitment, but hey I'm here to learn.
    A set of wheels have caught my eye and they are 15x8 et25 in 4x100. Will they fit on a mk1 with rolled guards without too much hassle? And what's the best tyre option? 165/45-50? I'm after a little bit of poke but id like it to be drivable, however this ain't gonna be a daily.

    What are your experienced/professional opinion and thoughts?

    Cheers
    '79 GLD

  2. #2
    Join Date
    Jan 2008
    Location
    Strathfield,Sydney
    Posts
    996
    do you remember my old car?
    I had 15x8 et 14 approx on the fronts and the rear is 15x8.5 et 9 approx cant remember the exact figures i have them somewhere but that would be very close. I also had -3 camber on the rear n around -1.5 on the front, fronts were fine but couldnt seat people in the rear. So 15 x 8 et 25 mmmm dont think so if youre after a LIL poke. Ill post pics later when i get home work dont like photobucket lol. Also depends on suspension mate you on coils?

    76 Scirocco

  3. #3
    Join Date
    May 2009
    Location
    Melbourne
    Posts
    88
    Thread Starter
    Your car is the very reason why I want to do this Dom

    So it's a no go then? It will be on coils.
    '79 GLD

  4. #4
    Join Date
    Feb 2012
    Location
    w.a
    Posts
    10
    15x8 +25 will fit, will be pretty flush but should work...

    i went with 15x7 +20 with a 165/55/15 federal, could do with a 10mm spacer to bring it out a little, but wont rub/scrape, so if you want carefree fitment, go for something closer to that

  5. #5
    Join Date
    May 2009
    Location
    Melbourne
    Posts
    88
    Thread Starter
    hmmm food for thought, so it can work? and eventually if i did want a bit of poke i could just slap some spacers in?

    does anyone know what centre bore is required for a mk1?
    '79 GLD

  6. #6
    Join Date
    Feb 2012
    Location
    w.a
    Posts
    10
    57.1 man

  7. #7
    Join Date
    Jan 2010
    Location
    Melb Westsideeeee
    Posts
    1,456
    Users Country Flag
    15x8 +25 would sit pretty damn good on the front, and 165/45-50 would be a pretty big stretch i reckon, its not impossible, but will be hard to find a place to willingly do it lol. As for the rears if you got a 10mm spacer, it would sit very nice too IMO

    Im running the same setup but +10 and it pokes, but a bit too much on the front i think
    - Orange Golf mk1 LS, 1.8 5speed, 32/36 - sold
    - Golf mk1 Swallowtail rebuild, completely stripped
    - Brown U.S import 81 cabby
    - 88 Honda crx b18cr

  8. #8
    Join Date
    Nov 2011
    Location
    Ballajura, W.A
    Posts
    311
    Users Country Flag
    Where can I get center bore rings from in WA?
    Last edited by EwenHayton; 07-03-2012 at 04:53 PM.

  9. #9
    Join Date
    Nov 2005
    Location
    Melbourne
    Posts
    3,942
    Users Country Flag
    15x8 ET7 165/50's on my old mk1








  10. #10
    Join Date
    Feb 2012
    Location
    w.a
    Posts
    10

    you cant get a 165/45... as far as i know no such tyre. for a 7 or 8 inch wide rim, you want a 165/55/15 - either toyo TEO plus or a federal 595evo

    sales@tech9tyres.com.au

    when you need em, hit me up. they arent that cheap

Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |