What did you fix/replace on your Mk1 today?

[mikinoz]

Drove the car tonight with the new clutch cable in and the experience is orgsamic over the previous cable that was like depressing a rusted one!

So good, makes all the difference!

[vipergreen]

Fixed the interior lining of the roof last night - gaffa tape, sweet, done. Also an oil change. Desperately waiting for tune up over weekend - timing is all out, over-revving and stalling at every stop.

[mikinoz]

I dare not say it, but nothing has needed attention this week... What is going on?

[Retired]

You sold it? or you have not driven it?>

[Jarred]

See Mik as thinking about getting rid of it, hence it started behaving properly!

[Retired]

There had to be a reason.

[mikinoz]

I have driven it every day. Behaving since I took the grinder too it last weekend maybe?

[mikinoz]

Got jiggy with my BIL from Tas and a roll of tint film.

[kavlfc]

After nearly 3 years spending to make sure it's a reliable and legal daily I've finally managed to spend some cash personaliing me Cab So, over the last three days I've done this . . . . . . . . . finished today

Before :


After fitting lightly smoked crystal X-hair outers and smoked X-hair inners :


Before :

After :


Have fitted some smoked sides too.

Also fitted a new jukebox. Unfortunately 'Bodgit and Scarper' had fitted the old one so took me 2 hours to replace all the insulting tape with proper crimp connectors. Worth the effort tho', got more technology in me dash now than Apollo 13 and that went to the moon
Cheers for looking
Chris

[gldgti]

well at 1pm today i set to work on the LS...

pulled the entire front end off, both sides: driveshafts, wishbones, uprights, tierods.

then i got to work -

> replaced LHS outer CV and boot
> replaced both inner CV boots and regrease
> replace tie rods and boots
> pressed out old control arm bushings, replaced with red prothane ones
> cleaned up and painted control arms
> drilled out old balljoints, removed and replaced with new balljoints and M8 high tensile bolts
> replaced uprights with early cabrio ones and new wheel bearings
> refitted everything, wheel aligned, steering rack centred, and test drive complete by 7:30pm tonight!

the result - MAN - i cannot believe how damned sticky the car is! i have NEVER in my life driven a vehicle that responds so beutifully to driver input!

can i just say - this foux-pas about having control arms past horizontal - i can't fault it myself. mine are quite a ways past horizontal and the car handles absolutely wonderfully!.... its possible that because of the large aftermarket front swaybar the characteristics of my car are different from a car without the swaybar...



EDIT: ...and i just bought a new carbie on ebay on a whim :-}