What did you fix/replace on your Mk1 today?

[Jarred]

and what will you be doing to the fronts today Dom? Rice bounce much! ahahha

[Jarred]

Pulled my seats and carpet.

boot is a bit rusty, but front floors are nice and clean!

[hjpks]

Installed a voltmeter in my GLD, and tried to sort out the dash wiring

[ontarv]

fitted good lower control arms which i sand blasted and painted purple
2 hubs refurbed with new bearings aaaand painted purple
and may have accidently cut my springs a bit more
really bangs now on the big bumps
pic's when blasting

[GoLfMan]

stripped the interior and carpet out, some suface rust on the passenger floor but otherwise mint

[thestu]

i fixed the non working tacho problem and put a big tacho in... its not mounted anywhere "VL turboish"

[16v_kid]

getting the floor to paint..so i had to take of all that hard plastic under the carpet it took like 5 days to take off...at the end all of the rubber/plastic was around 7 to 10kg....NO JOKE...
painting tomoz....

[Valver.]

Removed the spacer plate from my ABF and installed an OEM VRS kit and a standard, rebuilt ABF head. Went to time it up and realised the dolt at the engine builders had left the inlet cam one tooth out on the chain... undid everything, pulled cams, re-timed, lubed up and reassembled - looking to be sold in the next few months!

Ordered lots at the Autotech 40% sale (I hope others took advantage of this!)

[Jarred]

...

Ordered lots at the Autotech 40% sale (I hope others took advantage of this!)

not that I would have had anything to buy, but damn.! 40%!

[Valver.]

not that I would have had anything to buy, but damn.! 40%!

ECS tuning have a decent sale aswell, but most things they're advertising aren't actually at -40%, whereas the Autotech one was everything except LSDs and coilovers