Taking off Bagdes

[DubSteve]

Hey Guys just curious to know how do you go about taking off bagdes on a mk1 I want to freshen them up if possible. As I know that they have holes.

Also are they just stuck on by a double sided tape?

I went looking for new ones and they seem to cost a bomb for new ones

Cheers Steve

[Retired]

AFAIK the badges are stuck on with double sided tape. Don't know about clips or anything but there is definitely holes for some stupid reason.

CrazyQuiffs (http://www.golfmk1.co.uk/) is awesome for parts from what I have heard... Also a friendly bloke. Got a lot of rare things like GTI trim and so on. His badges range from £18 to £22.50 and compared to quiet a few others I have seen, thats pretty cheap. He also has the side stripes you were looking for.

vwturbo.co.uk also has some awesome stuff, including things like reprinted warning stickers like tyre pressure and fuel stickers.

[alex g]

fishing line is the go to reomove them, slid back and forth under the badge

and if you want the holes filled i can help you with that

[XXX-1.8T]

No need to take them off re

http://www.vwwatercooled.org.au/newf...ead.php?t=2445

Thank me later!

[RedMk2Gti]

Mk1 hatch badges should be held by these retainers
http://cgi.ebay.com/ebaymotors/Gen-V...1%7C240%3A1318

If yours are double side taped, that mean your car ex-ex-owner didn't bother to do it right, these holes are there for good reason.

[DubSteve]

No need to take them off re

http://www.vwwatercooled.org.au/newf...ead.php?t=2445

Thank me later!

Hahaha thanks re!!! I'd do it like that but the black is faded aswell

[greasykitchen]

Here's another source of replacement badges including some NOS (not that cheap though).
http://stores.shop.ebay.com.au/Mk1-A...805?_nkw=badge

[XXX-1.8T]

Hahaha thanks re!!! I'd do it like that but the black is faded aswell

ok well what you do is mask the car off get some black spray paint paint the whole badge black. Then follow my instructions with the silver and you will be set