the swallow tail project has begun.......

[TassieGTi]

Haha...spotted that one this morning.....nuts

[alex g]

working on some camber plates, cut to 3 degrees will weld them up tommorow, and unlike alot of camber plates/adjusters these will let the bolt remain straight and not put any extra tension on them

[ontarv]

very nice
but will the out side of tyre even touch the ground
big fat tyres and big fat arches and lots of camber
will look great!!!!!

[Jarred]

I'll be interested to see how those plates turn out, as I've wondered alot about these things...

[alex g]

[ontarv]

did you know what camber it had before
mine has 1.5 deg
if yours was similar , could be i bit much ?
but i could have bent stubs or thirty years of sag !!!!

[Valver.]

That's gonna look awesome with the phat rears Bear in mind, it won't drive very well with that much camber, though!!

P.S. Stock rear is -1 degree. I tried -2.5 with the Eurospec spacers and it was terrible. Apparently 1.5-2deg is good for a track car

[WABIT]

hehe who cares. LOOK AT IT!!! THOSE FATTIES ARE GONNA BE TUCKED UP TOP

nice weld BTW.....

wabit

[Valver.]

hehe who cares. LOOK AT IT!!! THOSE FATTIES ARE GONNA BE TUCKED UP TOP

nice weld BTW.....

wabit

I would, as Mk1s are better to drive than look at, but it's not my car, and yes it'll look hot (Mike McCoy style!!)

[alex g]

mike runs seven degrees???