Support VWWC

Results 1 to 10 of 219

Thread: Spyda's Mk1

Hybrid View

Spyda Spyda's Mk1 10-08-2010, 08:03 PM
Spyda I havnt realy taken alot of... 10-08-2010, 08:04 PM
Spyda Building up the sterio, its... 10-08-2010, 08:05 PM
Spyda Fun. If you look closly... 10-08-2010, 08:06 PM
Spyda The SD motor, coming out in... 10-08-2010, 08:10 PM
Spyda So far the motor has been put... 10-08-2010, 08:15 PM
koztek55 man i cant wait til its on... 10-08-2010, 08:23 PM
Gipson looks the business dude can i... 11-08-2010, 09:51 PM
Spyda In the OP man. 165/55 r14... 11-08-2010, 10:24 PM
velly_16v_cab i love this car...keep it up... 11-08-2010, 10:44 PM
thestu Cheers dude!! We shall sort... 17-08-2010, 06:29 PM
Spyda Hit another speed bump. I... 18-08-2010, 08:07 PM
GeorgeMK1 :rolleyes: Murphy's law.... 19-08-2010, 02:55 PM
Spyda Well one late night and an... 20-08-2010, 05:35 PM
thestu Doing good man!!! :D 27-08-2010, 07:45 PM
thestu Well done bro!!! Keep... 28-10-2010, 07:08 AM
Spyda 18days till DOVW, which means... 03-11-2010, 08:50 PM
Jace I wish I was a stereo guy. :(... 03-11-2010, 08:55 PM
WABIT lol lucky you did the engine... 03-11-2010, 09:02 PM
MeeM Agreed. Sometimes, paying... 03-11-2010, 09:03 PM
Water Boy Sick bass... 25kw gain... 03-11-2010, 09:15 PM
Jarred beast of an update! can't... 03-11-2010, 09:23 PM
thestu **** man. :( if I could help... 08-11-2010, 07:22 AM
DubSteve Good luck bro your almost... 08-11-2010, 08:56 AM
Spyda Not much to report. Got... 16-11-2010, 05:21 PM
Jace I use the steelies daily.... 16-11-2010, 07:22 PM
thestu Best EVER! 21-01-2011, 04:38 PM
Spyda Here we go, The system is... 21-01-2011, 05:48 PM
Spyda Its all these little bits... 21-01-2011, 06:00 PM
Jace New chrome does wonders huh!... 21-01-2011, 07:39 PM
Jarred wow, you've been a busy boy... 21-01-2011, 08:24 PM
thestu I realized after we did it... 29-01-2011, 07:23 AM
Volksee77 could be the crank seal... 29-01-2011, 11:26 AM
Spyda hahaha :P Ill check for... 29-01-2011, 01:08 PM
Jarred try and set is at standard... 29-01-2011, 03:08 PM
Volksee77 yeah if it's been sitting for... 29-01-2011, 03:24 PM
thestu Wicked job dude!!!!!! 30-01-2011, 05:13 PM
Spyda Nothing on TV and killing... 30-01-2011, 07:10 PM
Jarred nah it's good man, always... 30-01-2011, 09:17 PM
Spyda Did the timing today, exactly... 31-01-2011, 05:52 PM
thestu :( Are the jets in the... 31-01-2011, 05:59 PM
Valver. Have to say again, you're... 31-01-2011, 08:18 PM
Spyda Yeah man, i think so. I... 31-01-2011, 08:45 PM
Spyda Ok so bad news, car doesn't... 03-02-2011, 08:19 PM
mikinoz Clean install. I rate it. 03-02-2011, 08:38 PM
Peter Jones Yeah, that pump has been... 03-02-2011, 09:02 PM
GRN_VAGN Looking at buying one of them... 03-02-2011, 09:15 PM
Peter Jones That'll run a stock carb. no... 03-02-2011, 09:21 PM
GRN_VAGN Thanks Pete ;) Let us know... 03-02-2011, 09:24 PM
Spyda I just looked in to it a bit... 04-02-2011, 02:00 AM
Spyda Picked up the dizzy from pete... 04-02-2011, 04:28 PM
GRN_VAGN might sound weird, but double... 04-02-2011, 04:41 PM
Spyda Cheers mate, ive checked... 04-02-2011, 04:48 PM
Water Boy Have you got the fuel presure... 04-02-2011, 05:04 PM
Water Boy Also needle and seat? Main... 04-02-2011, 05:06 PM
GRN_VAGN yeah i got a 1.8L from a mk3.... 04-02-2011, 05:31 PM
Spyda Was told i dont need a FPR, i... 04-02-2011, 07:36 PM
Spyda The gf got this done:... 05-02-2011, 07:21 PM
Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Sep 2009
    Location
    Chillaxing in Tas
    Posts
    1,335
    Users Country Flag
    might sound weird, but double check timing belt and all timing marks again.

    My first 1.8l did same thing as yours, turns out cam was 1 tooth out.. it ran and revved fined... but it would hold idle and when it did it was 1400rpm
    It it hydraulic lifter? maybe one is sticking and not getting valve open fully.

    Might just be something very small
    <space for rent>

  2. #2
    Join Date
    Feb 2007
    Location
    Melbourne
    Posts
    1,508
    Users Country Flag Thread Starter
    Quote Originally Posted by GRN_VAGN View Post
    might sound weird, but double check timing belt and all timing marks again.

    My first 1.8l did same thing as yours, turns out cam was 1 tooth out.. it ran and revved fined... but it would hold idle and when it did it was 1400rpm
    It it hydraulic lifter? maybe one is sticking and not getting valve open fully.

    Might just be something very small
    Cheers mate, ive checked timing 100 times but i dunno how to get the teeth 100% right on the cam as all it says its the mark has to line up with the rocker cover.
    Its a hydraulic head off a mk2 gti, ill check the valves if it doesnt drive tomorrow.

    If it drives ok then i will take it to a pro next week and get it all done properly, im sick of pretending like i know what im doing.
    Any recomendations?
    MK1 GLS 3door
    A4 B7 2.0T

  3. #3
    Join Date
    Aug 2006
    Location
    Melbourne VIC
    Posts
    6,786
    Have you got the fuel presure regulator set at 6psi?

  4. #4
    Join Date
    Aug 2006
    Location
    Melbourne VIC
    Posts
    6,786
    Also needle and seat? Main jet blocked?

    When comes off chock there is a blockage?

  5. #5
    Join Date
    Sep 2009
    Location
    Chillaxing in Tas
    Posts
    1,335
    Users Country Flag
    yeah i got a 1.8L from a mk3. the timing for cam is a bit easier as it has a arrow on a plastic bit to line up with

    Not sure whats wrong, mine was same cold or hot..
    <space for rent>

  6. #6
    Join Date
    Feb 2007
    Location
    Melbourne
    Posts
    1,508
    Users Country Flag Thread Starter
    Quote Originally Posted by Water Boy View Post
    Have you got the fuel presure regulator set at 6psi?

    Also needle and seat? Main jet blocked?

    When comes off chock there is a blockage?
    Was told i dont need a FPR, i was also told the carbie was fine. Im not using the choke because when i did it got hot and at one point melted a bit.

    Also forgot to mention that it runs the same hot or cold now.

    At the moment i just want to get it to the show, after that im giving it to a pro because im done stuffing around with it. It was ok giving it a go and learning a few things along the way but its getting to the point where i dont have the time and pacients as well as the knowledge. I also need a car to drive around as dads merc needs work so we are sharing the polo.
    Last edited by Spyda; 04-02-2011 at 07:38 PM.
    MK1 GLS 3door
    A4 B7 2.0T

  7. #7
    Join Date
    Feb 2007
    Location
    Melbourne
    Posts
    1,508
    Users Country Flag Thread Starter
    The gf got this done:
    MK1 GLS 3door
    A4 B7 2.0T

  8. #8
    Join Date
    Aug 2009
    Location
    Victoria
    Posts
    1,788
    That's awesome, but does it help your car go broom-broom?

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |