sleeved wheel bolt

[GRN_VAGN]

Anyone know where to buy some??

Ive rang pabs, super cheap ect and no go,

looks like this

[killingwithasmile]

TEFBA :: Rare wheel nuts Wheel bolts Sleeves and Locking nuts :: Frank Tonitto

or get in contact with a fitting and turning machine shop, wouldnt be hard to make them

[Jace]

TEFBA :: Rare wheel nuts Wheel bolts Sleeves and Locking nuts :: Frank Tonitto

I got an urge to buy stuff I don't need from that guy. Need more blokes like that making ****.

[Golf Loon]

Nice Products in Marrickille Sydney
Nice Products
They only sell wholesale, but a car shop local to you will be an approved distributor

[GRN_VAGN]

Ahhhh thanks Matt!!!

[Peter Jones]

I've probably got a set of those if you don't mind a spot of rust.

Should come up OK if I bead blast 'em.

$50 posted to Tassie?

[GRN_VAGN]

Ill take em Pete,

Clean ya inbox, tried pm'ing you

[Peter Jones]

I think I've actually got a few different sorts of those, I'll dig 'em out and take some photos so you can see which ones would suit.

If you've got any measurements that would help too.

PM box cleared now.

[GRN_VAGN]

ummm ive got some mags nuts without the thread obviously,

so going by them, the sleeved bit is about 19mm diameter and 20mm long. whole nut is 40mm long... then you would need the thread at end, so an extra 20mm is thread?