NEW 2 Door golf! :D:D:D:D:D

[thestu]

Please tell me you're not driving this with no oil in the box


Pete

well i put oil in it before i put it in the car...but then a lot of oil went on the ground so i suspect there is no oil...but i need to borrow that special spanner from dean and get the oil pump. i shall take her down to volkspower and stick it up on a hoist and check the box oil.

[Volvo Driver]

Damn that sucks, as before if you want help I can come by after work to help, and weekends with enough warning.

[thestu]

Damn that sucks, as before if you want help I can come by after work to help, and weekends with enough warning.

cheers man

[thestu]

front right noise was the wheel bearing. got a new one just have to get that massive nut undone and then dean will do it if i take the hub down to him

any ideas on getting that 30mm nut undone?

[Jarred]

...
any ideas on getting that 30mm nut undone?

30mm socket....

[GoLfMan]

30mm socket....

and a MASSIVE torque bar

[mikinoz]

I tried to do my CV boot on the weekend and I could not undo mine!

[GoLfMan]

I tried to do my CV boot on the weekend and I could not undo mine!

yeh i know that feeling, seized on

[mollins]

and a MASSIVE torque bar

yeppo ... on a mates mk2 we the nuts were rusty.. we ended up using the 6ft leg from my engine crane with two people standing on it!

Make sure youve got good quality sockets and bar!

good luck!

[gerhard]

front right noise was the wheel bearing. got a new one just have to get that massive nut undone and then dean will do it if i take the hub down to him

any ideas on getting that 30mm nut undone?

Try a Shentai 12v impact gun.

I have one, have used it to remove my Jackaroo diff pinion nut, and manifold nuts. Removed both with ease.