Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: Mk1 seat options

  1. #1
    Join Date
    Jan 2009
    Location
    south west sydney
    Posts
    433

    Mk1 seat options

    I find the seating position in my mk1 a little high. i'm not super tall or anything but i still find it a little uncomfortable to reach down to change gears. i also have a "sun visor" tint on my front window that i find i end up looking through some of the time dude to my head being so close to the top of the windscreen.

    what are the seating options? the seat rail setup in a mk1 is unusual, with only one rail at the front. is there anything that will drop in to bring the seat down a few inches. what are the guys using for rails who have fixed back seats?
    Last edited by MiKe1_golf; 28-07-2010 at 03:07 PM. Reason: typo

  2. #2
    Join Date
    Aug 2009
    Location
    Victoria
    Posts
    1,788
    MK3's have the same tri-foot set up, i guess MK2's would too. Probably slightly different sizes. I remember a thread about it a while ago so have a search and you might find what you want.

  3. #3
    Join Date
    Sep 2009
    Location
    Chillaxing in Tas
    Posts
    1,335
    Users Country Flag
    I noticed the SEAT Cordoba uses same setup, maybe they would fit? and look newer which is handy
    <space for rent>

  4. #4
    Join Date
    Jun 2005
    Location
    Oakleigh VIC
    Posts
    4,395
    Users Country Flag
    MK3, MK2, Audi, Crdoba, Ibiza seats can all be made to fit by swapping the MK1 tin base and legs into the later seat.

    It's pretty simple to do and the back rest simply hooks back onto the MK1 base when you're don swapping the cushion over.

    Trouble is though all those options will leave you sitting up higher in the cabin.

    I'd probably modify a MK1 base to be a couple of inches lower and then fit that into a later seat.

    I'm 6'2" and had a lot of trouble making a race seat fit into the car low enough so my helmet wasn't rubbing on the roof.

    You should be able to get it much lower than stock with some mods.

    Pete
    79 MK1 Golf Wreck to Race / 79 MK1 Golf The Red Thread / 76 MK1 Golf Kamei Race Car
    7? MK1 Caddy
    79 B1 Passat Dasher Project
    12 Amarok

  5. #5
    Join Date
    Jan 2010
    Location
    Melb Westsideeeee
    Posts
    1,456
    Users Country Flag
    Yep, just modify your existing rails mate.

    I've done it to get my bucket seats in to fit and a bit lower. If i can find my camera i'd take a pic. Basically just chop and weld.. hehehe
    - Orange Golf mk1 LS, 1.8 5speed, 32/36 - sold
    - Golf mk1 Swallowtail rebuild, completely stripped
    - Brown U.S import 81 cabby
    - 88 Honda crx b18cr

  6. #6
    Join Date
    Jun 2005
    Location
    Perth. WA
    Posts
    1,203
    Scirocco 1 seats have the factory height adjustment, just need a miracle to find a set.

    Pete, you got those bases I sent over with the header i hope ??
    Lots of MK 1 Scirocco's...

    If it aint a MK 1 then it must be a donor car ??

    Cheers,
    Grant...

  7. #7
    Join Date
    Jun 2006
    Location
    Orange NSW
    Posts
    5,745
    Quote Originally Posted by roccodingo View Post
    Scirocco 1 seats have the factory height adjustment, just need a miracle to find a set.

    Pete, you got those bases I sent over with the header i hope ??
    Don't hurt me.. But when i put the bucket seats in my Mk1, i had a set i tossed out. A mate modified them and put them in a hilux, before tossing them in the bin.. So silly looking back now..

    APR Tuned | KW Suspension | INA Engineering | Mocal Oil Control |
    Website: http://www.tprengineering.com
    Email: chris@tprengineering.com

  8. #8
    Join Date
    Jun 2005
    Location
    Oakleigh VIC
    Posts
    4,395
    Users Country Flag
    Yep, got those thanks
    79 MK1 Golf Wreck to Race / 79 MK1 Golf The Red Thread / 76 MK1 Golf Kamei Race Car
    7? MK1 Caddy
    79 B1 Passat Dasher Project
    12 Amarok

  9. #9
    Join Date
    Sep 2009
    Location
    Chillaxing in Tas
    Posts
    1,335
    Users Country Flag
    i got some sorta nissan seats in mine.

    Height adjustment, front and rear of base. bucket type.
    Has custom mounts that where in a parts car i bought. bit of drilling and bolting and all done.

    And original mounts in tack for if i ever get done for it
    <space for rent>

  10. #10
    Join Date
    Jan 2009
    Location
    south west sydney
    Posts
    433
    Thread Starter

    how much lower can you go with that set up? the other option is to extend the shifter up and out closer to the wheel, but the throw is already pretty big and that would just make it even more noticeable. i'm thinking i'll try a bit of both. seat down an inch shifter up an inch.

    are there any short shifters available?

Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |